IE Audi B8/B8.5 A4 Performance Tune (2009-2015) | IESOVT21


$449.00

Free Express Shipping
Integrated Engineering

Part# IESOVT21

In Stock In Stock

Earn Rewards! +2245 Points


WHICH TUNE IS RIGHT FOR YOU?

STAGE 1

262 horsepower on stock hardware

  • Unleash hidden power in 30 minutes or less
  • No hardware upgrades required
  • Supports 91 or 93 octanes
  • Rev limit raised to 7000 RPM
  • Road speed limiters removed
  • Easy upgrade to Stage 2 or K04 (only pay the difference)
  • All safety protocols remain for reliable engine life
  • Engineered for all climates and elevations
  • Compatible with IE Cold Air Intake
  • Compatible with IE FDS Intercooler
  • Compatible with IE Intake Manifold Upgrade
  • Requires IE POWERlink Flash Tool
  • Requires Windows 7+ powered device

STAGE 2

Up to 290 horsepower with hardware upgrades

  • Full performance calibration for downpipe upgrades
  • Supports 91 & 93 octanes
  • Rev limit raised to 7000 RPM
  • Road speed limiters removed
  • Includes optional exhaust crackle
  • Requires downpipe upgrade
  • Requires IE Cold Air Intake
  • Compatible with IE FDS Intercooler (highly recommended)
  • Compatible with IE Intake Manifold Upgrade
  • Manual trans cars require clutch upgrade
  • All safety protocols remain for reliable engine life
  • Engineered for all climates and elevations
  • Requires IE POWERlink Flash Tool
  • Requires Windows 7+ powered device

K04 TURBO

Go all out with a turbo upgrade for 367 horsepower

  • Software to match BorgWarner K04 Turbo
  • Supports 91, 93, & 100 octanes
  • Rev limit raised to 7000 RPM
  • Includes optional exhaust crackle
  • Compatible with IE Cold Air Intake
  • Compatible with IE Intake Manifold Upgrade
  • Requires K04 Turbo upgrade
  • Requires Downpipe upgrade
  • Requires Intercooler upgrade
  • Manual trans cars require clutch upgrade
  • All safety protocols remain for reliable engine life
  • Engineered for all climates and elevations
  • Requires IE POWERlink Flash Tool
  • Requires Windows 7+ powered device

All available tune stages include various octanes at no extra cost.
Using the IE POWERlink cable you can switch between octanes as needed such as high octane files for race day and regular pump octane on your commute.

IE tunes are calibrated to perform with IE brand hardware, performance results may differ when installing alternative brand parts.

CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.

UPGRADING STAGE 1 TO STAGE 2/K04?

Adding more power is easy! When you upgrade from Stage 1 to Stage 2 or K04 with IE, you only pay the difference in tune cost with no extra fees. Simply install the required hardware upgrades then follow the link on your IE POWERlink software to purchase the tune upgrade and you will be blowing away the competition in minutes!

Audi B8/B8.5 TSI Upgrade Pricing

FROM TO PRICE

STAGE 1

STAGE 2

$50.00

STAGE 2

K04 TURBO

$150.00

STAGE 1

K04 TURBO

$200.00


WHAT DOES AN ECU TUNE DO?

Your factory Audi 2.0T power plant is controlled by a very advanced Engine Control Unit (ECU). This complicated computer is loaded with maps and routines to operate your vehicle efficiently, however, much of the available performance is left on the table and the calibration is not written to take advantage of aftermarket power adders such as cold air intakes, intercoolers, downpipes and turbo upgrades. IE's advanced ECU Tunes are extensively engineering to completely reverse-engineer the factory mapping and re-write new calibrations for ultimate performance without sacrificing factory comfort and reliability. These perfected ECU Tunes undergo thousands of hours dyno testing, street analysis, track days, altitude verification and more. Each test results obsessive revisions resulting in a rounded tune that will take your 2.0T TSI engine from "peppy" to "WOW"!

HOW DO I INSTALL THE TUNE?

IE's own in-house developed POWERlink cable and software gives you the freedom to quickly flash your car’s engine control unit (ECU) or transmission control unit (TCU) with your new IE performance tune. The cable simply plugs into your vehicle’s OBD-2 port, from there simply follow the on-screen directions to quickly upload the tune. Adding horsepower is as easy as clicking FLASH NOW!

The flash tool also grants instant access to upgrade tune stages, switch fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.

System requirements:

Laptop or tablet with Wifi connection and USB port running Windows 7 or above operating system required. Powered by 32 or 64 bit processor with 1.0GHz or greater and 4GB of Ram.

OPTIONAL TUNE FEATURES

Exhaust Crackle

Give your Audi turbocharged engine an aggressive sporty sound. This fun feature is guaranteed to put a smile on your face when you rev, decelerate, or let off the throttle for gear changes. This exhaust crackle is completely safe and entirely addicting. Optional feature included with stage 2 and K04 tunes only.

K04 Turbo

Stage 2 completely taps out all the available power from the small factory turbo. Upgrading the turbocharger to a BorgWarner K04 boosts your car to the next level, delivering up to 391HP & 398TQ! IE's TSI K04 Turbo Tune has been obsessively perfected to unleash the full potential from your turbo upgrade while remaining factory-like comfort and reliability with your choice of 91, 93, or 100 octane. Get ready to spin those tires with an addictive power and torque gain! 

Stage 1 Manifold

This free option is included with a Stage 1 Tune purchase and is for owners who have installed an IE Performance Intake Manifold (Sold Separately). IE Stage 1 Intake Manifold software fine-tunes the ECU calibration to match the manifold plenum and runner flow characteristics along with special tuning for the removed runner flaps. Even though tuning now matches higher flow characteristics of the intake manifold, performance numbers are still limited by the factory downpipe. Because of this, Stage 1 IM combination is only recommended for users who are planning on Stage 2 IM in the future, are trying to get rid of constantly failing runner flaps or cracking plastic manifolds, and building for improved engine bay looks. 

Stage 2/K04 Manifold

Included with all Stage 2 & K04 Tune purchases, This manifold calibration is designed for customers with an installed IE 2.0T Performance Intake Manifold (Sold Separately). Like Stage 1 IM tune, this software fine-tunes the ECU calibration to match the manifold plenum and runner flow characteristics along with special tuning for the removed runner flaps. Like Stage 1, this perfect for customers looking to replace the factory plastic manifold or an easy base for water/methanol injection kits.



POWERlink Mobile



Add power to your Audi or VW and experience the game-changing freedom of mobile flashing. The IE POWERlink cable and app connect to your Apple or Android phone, giving you the power to tune your car, change octanes, upgrade stages, perform diagnostics, monitor live gauge data, and more. All from the palm of your hand! Add power anytime, anywhere -no laptop, no cord, no hassle.

Existing IE POWERlink V4 cable owners will require a free firmware update to enable Bluetooth connectivity. Simply plug in your cable to your Windows 10+ device and launch our Flash Wizard software to auto-update your cable.

Note: POWERlink Mobile requires an IE POWERlink cable, and the necessary credits required to tune your car. For further questions, contact sales@urotuning.com.

 

 

Download the app today! Available on both Apple and Android









⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Can't find what you're looking for?
Odds are we can get it! Click Here Now