Revo Air Intake Kit | B8 | B8.5 | Audi | S4 | S5 | 3.0T - (NLA)


No Longer Available Discontinued
Part# RA222M200101 is NO LONGER AVAILABLE!

SHOP REPLACEMENT PART


Drawing on the very latest thinking from the BTCC arena, the Revo intake offers a tangible increase in airflow into the engine inlet, yet still manages to filter down to a much finer rate than the factory part. This ability is down to an innovative race-proven, motorsport-quality three layer filter, supported by galvanized, epoxy-coated mesh ensuring the filter cannot collapse.


The lightweight aluminium one-piece pipework has a unique Zircotec coating to reduce temperatures. The same clever coating has been added to the laser-cut aluminium heat-shield to ensure the filter is well insulated from ambient under-bonnet temperatures, the shielding is designed to seal against the underneath of the bonnet liner and makes use of the ducting in the factory grill to maximize airflow and prevent heat-soak – resulting in impressive horsepower and torque gains, particularly on cars with software upgrades.

The Revo intake system will work effectively on an otherwise standard Audi S4/S5 3.0 V6 TFSI, but obviously starts to really improve performance when coupled with a performance exhaust system and ECU engine software to provide maximum gains.


Features:

  • Increases throttle response, power, and torque
  • Custom heatshield
  • Increased airflow
  • Triple layer foam filter


Intake Performance Figures:


Revo Filter
The standard paper filter found in most vehicles performs well under normal conditions, however with increased power it becomes a major choking point in the system. Revo ProPanel filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing center "Mira’ on an industry recognized dust load test. On a full dust load test the foam filter was found to still be 99.3% efficient, filtering down to 5 micron while offering the least amount of restriction over similar products.



Part# RA222M200101 is NO LONGER AVAILABLE!


SHOP REPLACEMENT PART



Can't find what you're looking for?
Odds are we can get it! Click Here Now