Supertech BMW M50/M52/S50/S52 Inconel Exhaust Valve - Set of 8 | BMEVI-1030S-8

Supertech Performance BMEVI-1030S BMW S42 / M42 / M50 / S50 / M52 / S52 / M54 Exhaust valve

Set of 8

Specs:

• Head Diameter - 30.50mm (STD)
• Length - 105.65mm
• Material - Inconel
• Stem Diameter - 5.96mm

Supertech High Performance Race Engine Valves features:

• The microhardness is higher than the stainless steel base material, keeping good ductility beneath the hard nitrided layer (microhardness is 800HV minimum)
• Surface finish is smoother than with chromed stems, having less friction between stem and guide.
• Valve seat surface is harder with the nitrided layer, lasting longer with lead free fuels, alcohols, nitro or other "explosive" mixes. Matches any kind of seats (nodular iron seats, steel powder metal seats, hard aluminum-copper seats or beryllium copper seats).
• Higher rpm's engines take full advantage of all previous features. The higher the engine speed the bigger the power loss due to internal engine friction! The black nitride layer reduces this power loss due to less valve-guide friction.
• The nitrided layer is adhered to the base material at a microscopic level, so does not"flake" or brake when the valves bend due to impacts with the pistons.
• The Black Nitride applies to the whole valve while the chrome coating is only applied to the stem.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov