3" stainless steel cat delete test pipe for the Audi A4 B7 2.0T FSI.
High flowing, full 3" stainless piping from front to back (no transition), for stock location (stock K03 or K04 turbo) use. Deletes the restrictive factory cat right out of the turbo. Fits the longitudinally mounted 2.0T FSI engine found on both Front Wheel Drive and Quattro models of the Audi A4. Has both front and rear O2 sensor bungs in factory location. All TIG welded construction for max flow and durability. 4 bolt flange bolts to K03 or APR K04 turbo outlet and bottom flange bolts to stock lower downpipe or any aftermarket downpipe using the stock style 3 bolt flange.
Unit drops right in to replace the place of the stock cat. The 3" piping throughout allows future upgrade to full 3" exhaust system. This modification is a very critical area in the exhaust system in allowing the rest of the exhaust system to flow freely since it replaces the first components out of the turbo which also happens to be the most restrictive component that acts as a bottleneck for the rest of the system. Our test car had a nice pretty polished “catback” system that retails for $1200 and did nothing until the bottleneck was removed with our cat delete pipe. A must have for any 2.0T running on the racetrack.
For offroad use only!
Please Note: These test-pipes are fabricated in-house on a per order basis, and usually have a 1-2 week lead time.