AWE Tuning Audi 4.0T S-FLO Carbon Intake - RS6 | RS7 | 2660-15012

The RS6 / RS7 S-FLO Carbon Intake VERSION 2.0 IS HERE!

Full floating carbon construction, no silicone. The AWE RS6 / RS7 S-FLO Carbon Intake features full carbon fiber construction allowing smooth transitions of airflow from the grille inlet to the turbo inlets. By deploying a new grille-mounted air box inlet, and utilizing the factory accordion turbo couplers, the S-FLO Carbon Intake floats in place under heavy torque situations, preventing strain on the carbon fiber.

Unlock power, and look good doing it. Presenting the AWE Tuning Audi RS7 S-FLO Carbon Intake:

• California Air Resources Board Executive Order #D-832
  
• Proven power on Stage 1 and Stage 2 cars, with and without downpipes
  
• Completely redesigned to support higher power applications
  
• Max gains of 32 hp and 50 ft-lbs of torque @ 3150 rpm, crank (Stage 2 software + downpipes)
  
• Max gains of 15 hp and 27 ft-lbs of torque @ 2670 rpm, crank (stock software)
  
• Durable and washable high-flow AWE S-FLO Filter included
  
• Perfect integration with OEM inlet ducting
  
• Smooth transitions from full carbon fiber airbox inlet and turbo inlets
  
• Retains stock mounting locations
  
• UV-stabilized resin and clear coat
  
• Perfect fitment - guaranteed
  
• No Check Engine Light Guarantee
  
• California Air Resources Board Executive Order #D-832 does not apply to the 2013-2016 Audi RS6 models. The 2013-2016 RS6 models were only available in the European Market.

The S-FLO Filter

The included AWE Tuning S-FLO Filter is designed specifically for this air box to be easily serviceable and to maximize airflow. This increased air flow unlocked maximum gains of 25hp and 24ft-lbs of torque at the crank.

The combination of carbon fiber airbox and included S-FLO Filter makes for a more aggressive intake note, with a distinctive turbo spool sound.

The AWE Tuning Audi RS7 S-FLO Carbon Intake is the perfect sophisticated performance enhancement, delivering power + looks in one proven package.

Power Testing

The RS6 / RS7 S-FLO Carbon Intake has been power and quality tested on the stock setup as well as under aggressive stage two conditions which incorporated high-flow downpipes. The RS6 / RS7 S-FLO Carbon Intake produced healthy gains in all scenarios, and has withstood long-term real-world testing for quality and performance.

Add in our new enlarged, integrated honeycomb-meshed port located on the top of the S-FLO’s air box, and you’ve got optimal airflow even when pushing higher-than-stock boost levels.

In other words, this box has both the looks and performance to earn the AWE S-FLO badge.










Install Instructions can be found here.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov