Home > Uro Stance > Airbag Kits > Audi Airbag Kits > B5 Audi A4/S4 Airbag Kits >

  Air Lift / Accuair e-Level Full Package w/ Rocker Switch, B5 Audi A4/S4 Quattro


Part# BAG_B5_Quattro_ELevelRockerKIT

Front Bags

Rear Bags

Air Tank

Air Line Size


Compressor Check Valve

Water Trap Kit

Power Supply Kit


Description of the e-Level System:

The e-Level™ Electronic Leveling System is the heart of any AccuAir load leveling suspension package and provides unparalleled technology and features. This second generation controller allows you to save three unique vehicle positions into memory based on True Position Based Height Sensors installed in each corner of your suspension. These three heights are then instantly accessible by the touch of a button. While parked or driving, the system will utilize its Ride Monitor ModeTM to maintain the vehicle height while loading or unloading passengers and cargo or when road conditions change while driving. All of this automatic intelligence is unnoticed by the driver providing a consistent and perfected ride quality for all circumstances.

Operation of the e-Level™ system is simple, yet its features are constantly working to provide you with the perfect ride-height in all conditions. Because the e-Level™ system utilizes height sensors instead of pressure sensors, changes in load are accurately corrected for. The adjustments made by an e-Level™ controller are so accurate that each wheel maintains its height within 1/8 th of an inch and actually prevents cross-loading of air springs at a higher accuracy than any other method (Read “Air On Scales”). This is all made possible because the system calibrates to the vehicle upon installation and then learns how your air suspension behaves over time (similar to the technology used in today’s advanced fuel injection systems). This flexibility allows the e-Level™ controller to be used on any vehicle with a wide variety of valve speeds and requires no user tuning.

Combine all of this straightforward functionality with the intuitive e-Level™ TouchPad™ Interface for the ultimate in ease of use. This sleek interface is machined from billet aluminum to yield an unmatched high quality look and feel. The TouchPad™ gives full manual control over each air spring individually as well as fronts and rears in “pairs”. Position feedback is given to the user with a clean yellow glowing ring around each of the position buttons and every button is back lit with crystal white LED’s for night time operation. All wiring harnesses are color-coded and Plug-n-Play for quick and error-free installation.

Features of the e-Level System:

- 3 programmable heights lowered / ride height / raised

- RideMonitor™ mode adjusts as needed while driving or parked

- TruPosition™ height sensors provide accurate leveling regardless of load

- Ride-height-on-start gets you ready to drive when you turn the key

- Anti “cross-loading” height management gives balanced spring weights

- TouchPad™ accesses your 3 programmable heights and controls each individual air spring or front and rear as a pair

- Key-chain remote (optional) accesses your 3 programmable heights from up to 200 ft away

- Automatically calibrates to any air suspension system on any vehicle (no user programming required)

- Straight to height adjustments avoid valve “pulsing” and gets you ready to drive immediately

- Active learning maximizes leveling performance after every adjustment

- Manages air compressors for faster height recovery

- Monitors vehicle voltage and automatically turns compressor(s) off at 10.5 volts to prevent a dead battery

- 100% weather-proof for under vehicle mounting

- Plug-n-play wiring harnesses for ease of installation

- Each system is 100% factory tested

Description of the VU4-Corner Valve Unit:

The AccuAir VU4 4-Corner Valve Unit is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8” D.O.T. approved air fittings for all of it’s plumbing connections. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. All of this technology is housed in a unique enclosure design which routes each of the solenoid wires to a single weatherproof connector, eliminating typically loose wires. This not only improves the appearance, but it also guarantees proper operation for every installation. With an overall size of only 5”x 3”x 3” and the ability to survive harsh under vehicle environments, this product is ideal for any application.

Features of the VU4-Corner Valve Unit:

- Pre-wired & port numbered for reduced installation time

- 3/8" push-to-connect D.O.T. fittings eliminate pipe threads for 100% leak free operation

- Dual inlet & exhaust ports for maximum flow (plug extra inlet if not required)

- Compact layout for minimal space usage

- Four built-in 1/4" gauge/sensor ports

- Anodized aluminum manifold to prevent corrosion

- 100% weather resistant for harsh under vehicle environments
Vehicle Applications
  • All Mk4 Golf/Jetta (Excluding R32)

Certified Seal

Security Seals

UroTuning.com is an Upfront Merchant on TheFind. Click for info.