Cylinder Head Gasket Set, Mk4 VR6
Complete set of gaskets needed for the top end of the engine.
Sometimes you have to take the cylinder head off of your vehicle to diagnose problems, have it rebuilt, or replace a faulty head gasket. It tends to be a fairly labor intensive job, so anytime you can make it easier is definitely helpful.
When it comes time for reassembly, one of the biggest problems is finding quality gaskets and seals. Urotuning has your solution with this cylinder head gasket kit. With the proper, high quality gaskets, your reassembly will go much easier with no need for trip after trip to the local auto parts stores. Intake, exhaust, downpipe, valve cover, and in some applications valve seals will all help to get your engine into top condition.
When it's time to put everything back together, there are some things that should not be overlooked. Most cylinder head fasteners found on European automobiles are a one time use or stretch bolt. To be sure that everything is tightened down properly, it is important to replace them to get the proper torque reading and ensure the longevity of your repair.
During removing and installation, you will probably run across some unique fasteners.
Mk4 Golf/Jetta VR6
Valve Guides (Set of 12), 12v VR6
Oil Dipstick, Mk4 12v VR6
Connecting Rods IE 164 x 20mm Forged Rods for VR6
Timing Chain Guide Rail, Upper Right Mk4 12v VR6
Oil Filter Housing Cap, 1996-up 12v VR6
Valve Stem Seals by IE - 7MM Exhaust - Priced Each
VR6 Upper Camshaft Sprocket - Priced Each - 2 Requ
Valve - Exhaust (106.95mm), 12v VR6
Join Our Mailing List
Shipping & Returns
Terms and Conditions
Become an Affiliate
CONNECT WITH UROTUNING
813.444.7021 - Call or Text
UroTuning LLC | 501 S. Falkenburg Rd Ste A-3 | Tampa, FL 33619