GruvenParts.com offers ultra sleek and lightweight crank, water pump,
alternator, tensioner, and under-drive power steering pulleys for your 12V VR6
engine. These pulleys are precision CNC'd from aircraft grade billet aluminum.
Complete pulley set reduces the rotating mass of the engine by 8 lbs!!
PLEASE NOTE - THE ONLY PULLEY THAT IS UNDER-DRIVE IN THIS SET IS THE POWER
STEERING PULLEY. All others are normal OEM drive. In our experience, the only
pulley safely capable of being under-driven is the power steering pulley.
Installation of any or all of our pulleys does not require different length
belt, and will not affect aftermarket supercharger installations.
Lightweight Billet Aluminum VR6 Tensioner Pulley
Plastic may have
made the bean counters at VW happy, but it has no business as a pulley on your
high strung VR6 motor. Ours is extremely light weight and contains a precision
bearing that will far outlast the OEM. We even use a snap ring to install the
bearing, so if replacement was ever needed, it's a breeze. Fits Mk2, Mk3, and
Mk4 12 Valve VR6 engines
Click Here for Installation Instructions
Lightweight Billet Aluminum 12V VR6 Water Pump Pulley
steel water pump pulley is stamped which creates internal stresses that
eventually cause the pulley to crack at the sharp bend radius. Needless to say,
you don't need this problem on a hot running VR. Ours is machined from a solid
chunk of aluminum with generous corner radii and is therefore many times
stronger than OEM. Weighing in at a scant 250 grams, its less than half the
weight of the stamped OEM pulley. Fits ALL Mk2, Mk3 and Mk4 12 Valve VR6
Click Here for Billet Water Pump Pulley Pictures
Lightweight Billet Aluminum 12V VR6 Crank Pulley
This pulley is
Lose the boat anchor of the Audi and VW VR6 steel crank
pulley with this 500 gram lightweight billet aluminum version. It is the
lightest crank pulley out there and will allow the engine to spool up faster
while preventing inertial losses caused by the overweight OEM pulley. It has
been proven by countless hours of track abuse in normally aspirated,
turbocharged, and supercharged VR6 engines. Comes with a specially machined
replacement key for a perfect fit. Fits Mk2, Mk3, and Mk4 VW and Audi 12 Valve
Lightweight AND Under-Drive Billet Aluminum 12V VR6 Power Steering
A lightweight billet aluminum version of the OEM power steering
pulley, sized to allow a 10% reduction in power steering pump rotational speed.
This will lessen the parasitic losses from the power steering pump at higher
rpms by preventing pump over-rotation. This pulley fits ALL MK2, MK3, and
MK4 12 valve VR6 engines. Please note this pulley is non-ribbed which allows us
to achieve the under-drive feature. Similar to the water pump pulley, ribs are
not needed on the power steering pulley. This pulley has been proven by
countless hours of track abuse with no problems whatsoever.
Lightweight Billet Aluminum Alternator Pulley
A 100 gram
paper-light billet aluminum version of the steel OEM alternator pulley that lets
the motor spin more freely. Complete your pulley set for a show quality engine
bay. Fits Mk2, Mk3 and Mk4 12 Valve VR6 engines and 2.0L 4 cylinder engines.
Click Here for
a Billet Alternator Pulley Pic