NGP Type I Coilovers Suspension System - VW GTI / GLI Mk5/Mk6, Rabbit / Golf Mk5 / Mk6, Audi A3 8P
Fits All Mk5 GTI/Golf/Rabbit/Jetta, Mk6 GTI/Golf/GLI, and Audi A3 8P models.
After many hours of research and development, NGP is proud to present our own high quality, best in class performance coilover system.
At NGP, we have the same ideals for our cars that you do: We want the best quality products, at a great price. Unsatisfied with the current sacrifices often made with other budget coilover systems, we decided that it was time to develop our own coilover system that offered great handling, a comfortable ride, and long lasting reliability, all at an affordable price.
While most entry level coilovers are designed to be cheap, using low quality materials and inferior production techniques to cut costs down, our Type I coilovers are quite the opposite. We realize that the best products for a German car are those that are made in Germany, and because of this, so are our coilovers. Crafted with only the highest possible level of quality and materials that your German designed and built vehicle deserves. We're sure that you'll find the production quality of our German made Type I coilovers is far superior to other coilovers typically produced by far east facilities.
The twin tube low pressure shocks of our Type I Coilovers feature an internal damping system matched to high quality alloy springs that adjust and adapt to differing road or track situations. They are designed to give you unparalleled handling without sacrificing great ride quality. We have tested various damping and spring designs extensively to ensure that they are calibrated to perform especially well on the varying conditions of US roads.
Our Type I coilovers feature light weight steel housings with a heavy duty zinc plating for great weather protection. The housings are designed with adjustability in mind, and increased the spring perch thread size. This allows for faster, more smooth adjustments, and also works as a prevention to road grime buildup in the threads. They also utilize a single locking perch design, which prevents thread and locking ring binding issues that are common with coilover systems using dual perch designs.
Ride height adjustable from 30-65mm (1.2-2.5")
Made in Germany
Custom calibrated Progressive rate front and rear springs
Advanced internal damping system optimized for US vehicles and roads
High grade corrosion resistant steel housings with zinc plating
Twin tube low pressure shock design
Fully Powdercoated high quality alloy springs
5 year limited warranty
Designed to give the the best blend of lowering range, great handling and ride quality for your show car, daily driver and occasional autocrosser look no further than NGP's Type I coilover system.
All Type I coilovers feature a five (5) year limited warranty for springs and damper parts. Please contact firstname.lastname@example.org for any warranty related questions.
The NGP Type I coilovers are not designed as a one-size fits all solution. While these can go fairly low, it is not their primary design function. They are for balanced performance with a sporty look and a firm but fair ride quality. Lowering too far from the recommended ranges can impact both ride and warranty reliability.
For those looking to go to the more extreme side of things we are prototyping out our Type II system for Mk5 / Mk6 as we speak. The Type II will allow lower ride heights, plus offer significantly higher linear rated springs for track use. We're still finalizing damper and spring selection, but will have these available in the near future.
Please note: These coilovers will not work on Mk6 models without independant rear suspension.
KW v1, Suspension Coilover System, Mk5/Mk6
KW v1, Suspension Coilover System, Mk5/Mk6
ST Suspension Coilover System, Mk6 Golf/GTi
KW v3, Suspension Coilover System, Mk5/Mk6
H-R Ultra Low Coilover Kit, Mk6 GTi/Golf
-V-Maxx Fixed Damping Coilover Kit, Mk6 Golf/GTi &
ST Suspension Coilover System, Mk5/Mk6
H-R Ultra Low Coilovers, Mk5
Part# 60 AV 30/55
Join Our Mailing List
Shipping & Returns
Terms and Conditions
Become an Affiliate
CONNECT WITH UROTUNING
813.444.7021 - Call or Text
UroTuning LLC | 501 S. Falkenburg Rd Ste A-3 | Tampa, FL 33619