- Mishimoto, the world leader in performance cooling products, introduces you to the Mishimoto Universal 10-Row Oil Cooler Kit!
*** Custom installation must be done. This is NOT a direct fit kit!
12.91" x 2.81"
(1) - 10 Row Oil Cooler (Silver or Black)
(1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting
(1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings
-- One straight fitting and one 90 degree swivel fitting
(1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)
(2) - -10AN Fittings
(2) - Dowty Oil Seals
(1) - Large O-Ring
(2) - 1/8" NPT Allen Key Plugs
(2) - Sandwich plate adapters
No dashes = M20 x 1.5 -- M20 x 1.5
2 dashes = 3/4" -16UNF -- 3/4" -16UNF
4ft .75 inch
4ft 9 inch
BRAIDED HOSE FITTINGS
SANDWICH PLATE FITTINGS
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact firstname.lastname@example.org.
INSTALLATION TORQUE SPECS
15-25 ft/lbs (operating range) for all straight fittings and banjo bolts. Do not exceed the maximum torque rating of 35 ft/lbs.