Home > Audi > A4/S4 > B5 A4 > Engine > 1.8T > Motor Mounts >

Transmission Density Line Mount (Left - Manual) | B5 Audi A4 | VW Passat 1.8T


034-509-4013 Transmission Density Line Mount (Left - Manual) | B5 Audi A4 | VW Passat 1.8T



 
034-509-4013
Price:
$42.00


Qty:

Product Info
 

We are VERY excited to be announcing the release of our 034Motorsport Street Density and Track Density motor mounts for a wide range of Audis!

We've been testing these mounts for some time to ensure they are reliable and meet the criterion for the intended use - results so far are very exciting!

WHAT THEY ARE: A new line of rubber motor mounts made FOR us by OE suppliers to OUR specifications.

STREETDENSITY Mounts are solid rubber mounts with a 50 durometer about 10% stiffer than stock, this means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance with serious sport intentions. Note, since there are no voids or air pockets in these mounts, even though the rubber is only 10% stiffer, the resulting reduction in drivetrain movement is actually 25% stiffer.

TRACKDENSITY Mounts are also solid rubber mounts, but with an 80 durometer approx 90% stiffer than stock, these are solid for all practical purposes and result in ZERO drivetrain movement. Vibrations from the engine are noticeably increased but not horrible. Definitely not smooth and quiet like stock mounts, but in return you get a completely locked down drivetrain with NO slop or deflection. These are perfect for the street/track enthusiast who doesn't mind a marked increase in vibration from the drivetrain.

NOTE, THIS IS NOT AN OE MOUNT, AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.


Mounts will fit All B5 A4 1.8t manual transmission drivers side mounts. This mount will NOT fit Automatic trans cars.

Choose stiffness below, price PER mount, one car will need 1.