IE 1.8T 20V Street Camshaft Set - (NLA)


No Longer Available Discontinued
Part# IECVA2 is NO LONGER AVAILABLE!

SHOP REPLACEMENT PART




high performance camshafts

Integrated Engineering is proud to offer the second generation of VW/Audi 1.8T 20V performance camshaft sets. 1.8T factory cams are tuned to a very low RPM operation with small turbochargers resulting in an engine that struggles to make power in the high RPM range with larger aftermarket turbochargers. Integrated Engineering camshafts re-tune the sequencing of the valves, allowing for more airflow at high RPM.

reliable performance

Version 2 of IECVA2 street camshafts feature new IE proprietary cam profiles and center lines. These new grinds result in further increased performance, cleaner idle properties, and a more linear power band. IECVA2 camshafts are a strong street setup intended for turbocharged applications using turbochargers in the 400-650bhp size range or when a closer to factory idle is required.

dyno chart

These camshafts are the only sets on the market designed by engineers who truly specialize in the 1.8T application. As a result, they are much more finely tuned to the specific needs of these engines and produce extrordinary results. They are CNC ground to exacting standards from camshaft profile data exclusive to IE and designed by our engineering staff. By eliminating the troublesome internal adjusters, and incorperating OE style timing marks, we have not only made these camshafts reliable, but also very simple to install.

camshaft development

We have incorporated an extensive program of dyno testing to optimize these camshafts for the engine setups people actually run. IE camshafts are carefully designed for optimum valvetrain harmonics and safe, long life of your components, yet engine dyno testing yielded gains of up to 60 peak bhp at 22psi. If you intend to run higher than factory RPM with these camshafts, an Integrated Engineering matched spring and retainer set (PN: IEVTVA2) is highly recommended.

Features
CNC ground on new chill hardened cores
Dialed in via extensive engine dyno testing
For OE style hydraulic lifter buckets
Simple Install using OE timing marks
60+HP gain on large turbo setups
Strong power from 4500 to 8000 rpm

AVAILABLE IE 1.8T CAMSHAFTS

POWER CURVE TURBO SIZE APPLICATION IE PART NUMBER

5500 - 8500+ RPM

500 - 850+ HP

AGGRESSIVE STREET/STRIP

IECVA1

4500 - 8000 RPM

300 - 500 HP

AGGRESSIVE STREET

IECVA2

4000 - 7500 RPM

300 - 500 HP

MILD STREET

IECVA3


RECOMMENDED PART NUMBERS FOR USE WITH IECVA2 CAMSHAFTS

PART TYPE ENGINE TYPE IE PART NUMBER

IE VALVE SPRING & RETAINER KIT

ALL 1.8T ENGINES

IEVTVA2

IE CAMSHAFT INSTALL KIT

ALL 1.8T ENGINES

OEM-18T-CIK

About Integrated Engineering: Merging decades of experience with hundreds of hours of prototyping, engineering, dyno testing and daily usage evaluation has output exhaust systems that are the ultimate compliment to your performance car. IE products are proudly engineered, designed, and manufactured in-house, in Salt Lake City USA.


Part# IECVA2 is NO LONGER AVAILABLE!


SHOP REPLACEMENT PART



Can't find what you're looking for?
Odds are we can get it! Click Here Now