{"title":"AWE Tuning Intercoolers","description":null,"products":[{"product_id":"awe-tuning-performance-intercoolers-996-turbo-4710-13014","title":"AWE Tuning Performance Intercoolers - 996 Turbo","description":"\u003cp\u003e\n\t\n\u003c\/p\u003e\n\"They told me from the start of my build that the AWE Tuning intercoolers would do wonders. This was surely true, and proven when I tracked my car the first time since the intercoolers were installed (DIY install as well). I noticed no loss in power during long sessions of track time and even in some hot conditions. I'm stoked to have AWE in my corner working with me and also as friends that I love to hang out with. They know what it takes to be fast and have a good time while doing it.\" -- Bucky Lasek\n\u003cbr\u003e\u003cbr\u003eInlet Air Temperatures are a major area of concern for any turbocharged car. With many modified 996TTs producing greater than factory horsepower figures, the limits of the stock intercooling system have been far exceeded.\n\u003cbr\u003e\u003cbr\u003eCapable of handling well over 700hp, our 996TT Intercoolers are the best solution for owners looking to upgrade their factory system with a properly engineered solution.\n\u003cbr\u003e\u003cbr\u003eWe designed a cast end tank utilizing sophisticated CAD (Computer Aided Design) and CFD (Computational Fluid Dynamics) software to ensure proper flow distribution through the end tanks and intercooler. Tested extensively on the dyno, street and track, these intercoolers will perform flawlessly no matter the environment.\n\u003cbr\u003e\u003cbr\u003eCompared to stock, our cores are 37% larger (422 cubic inches vs 308 cubic inches). In contrast to the stock cores, ours are a high flow bar and plate style and are built to our charge row and fin count specs. These specifications resulted in improved intake temperatures by a massive 55F and improved drop pressure resistance through the core by 1 psi. Considering that extremely little trimming is involved to fit such effective units to the car, this is a huge engineering feat.\n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUnique Highlights of our kit design:\u003c\/b\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEfficient bar\/plate core style \u003c\/li\u003e\n\u003cli\u003eCast and machined end tanks for optimized air flow \u003c\/li\u003e\n\u003cli\u003eThick silicone boost hoses with proper profile where they mate to turbo \u003c\/li\u003e\n\u003cli\u003eT-bolt clamps for extreme clamping force \u003c\/li\u003e\n\u003cli\u003eDirect plug and play install that is easily reversible \u003c\/li\u003e\n\u003cli\u003e+16 crank hp dyno verified\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003eIn addition to the superior core and end tank design, our kit also features 6-ply silicone hoses with gentle curves to prevent bursting under pressure. Further, our hoses use a Nomex braiding for superior strength, instead of more common polyester. The very best materials and industry leading engineering separate this kit from all others on the market. To ensure OE reliability, we use CNC Machined factory style aluminum connections to mate our hoses to the factory Y-pipe.\n\u003cbr\u003e\u003cbr\u003eWhether you are simply running enhanced software, or are planning on a larger turbo upgrade for your car, our intercoolers solve all heat related issues that come with more turbo boost. Keeping your intake air temperatures low results in more power, better engine output stability when outside temps climb, and the safety margin needed when pushing the limit.\n\u003cbr\u003e\u003cbr\u003ePlease note,  AWE Tuning Porsche 996TT Performance Intercoolers are \u003ci\u003efor racing use only\u003c\/i\u003e.\u003cbr\u003e\u003cbr\u003eInstall Instructions can be found \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/AWE_996TT_intercoolers.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":12543927615543,"sku":"4710-13014","price":1928.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/4710-13014.jpg?v=1790013366"},{"product_id":"awe-tuning-performance-intercooler-kit-991-turbo-4510-11050","title":"AWE Tuning Performance Intercooler Kit - 991 Turbo","description":"\u003cp\u003e\u003cb\u003eAWE Tuning 991TT Performance Intercooler Kit Highlights:\u003c\/b\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e17% increase in volume over stock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePeak 32°F intake air temperature drop compared to stock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDyno-verified max gains of 26 HP and 21 ft-lbs of torque at the crank\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e50% decrease in pressure drop through intercooler cores\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIncreased fin density\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAWE Tuning designed carbon fiber ducts\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePrecision cast and machined end tanks for optimized air flow\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEngineered in-house at AWE Tuning\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePerfect Fitment - Guaranteed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFitment confirmed for both 991.1 and 991.2 Turbo and Turbo S models\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAWE presents the ColdFront™ Intercooler Kit for Porsche 991TT -- Precision cast end tanks, massive cores, more fins, carbon fiber ducting, backed by AWE R\u0026amp;D. If you’re serious about consistent cooling and proven power, read on.\u003c\/p\u003e\n\u003ch4\u003eAWE ColdFront™ Intercooler Kit for Porsche 991TT Highlights:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e17% increase in volume over stock\u003c\/li\u003e\n\u003cli\u003eLowers intake air temperatures by as much as 32°F compared to stock\u003c\/li\u003e\n\u003cli\u003eDyno-verified max gains of 26 hp and 21 ft-lbs of torque at the crank\u003c\/li\u003e\n\u003cli\u003e50% decreased pressure drop through intercooler cores\u003c\/li\u003e\n\u003cli\u003eIncreased fin density\u003c\/li\u003e\n\u003cli\u003eAWE bespoke carbon fiber ducts\u003c\/li\u003e\n\u003cli\u003eEfficient bar\/plate core style\u003c\/li\u003e\n\u003cli\u003ePrecision cast and machined end tanks for optimized airflow\u003c\/li\u003e\n\u003cli\u003e6-ply silicone hoses with factory-type locking mechanism\u003c\/li\u003e\n\u003cli\u003eStainless steel T-bolt clamps for extreme clamping force\u003c\/li\u003e\n\u003cli\u003eDirect, fully reversible, plug-and-play install\u003c\/li\u003e\n\u003cli\u003eEngineered in-house at AWE using sophisticated CAD \u0026amp; Computational Fluid Dynamics software\u003c\/li\u003e\n\u003cli\u003eAWE Fitment Guarantee\u003c\/li\u003e\n\u003cli\u003eFitment confirmed for both 991.1 and 991.2 Turbo and Turbo S models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDesigned in-house:\u003c\/h4\u003e\n\u003cp\u003eThe AWE ColdFront™ Intercooler Kit for the 991TT leverages generations of Porsche intercooler engineering, dating back to the 996. Cast end tanks designed in-house using sophisticated CAD (Computer Aided Design) and CFD (Computational Fluid Dynamics) software, specially designed cores, power testing and dyno-fueled refinement, and more.\u003c\/p\u003e\n\u003cp\u003eGoals set, torture testing executed, ColdFront™ Intercooler Kit for Porsche 991TT born.\u003c\/p\u003e\n\u003ch4\u003eMore Volume. More Fins. More Cooling. More Performance.\u003c\/h4\u003e\n\u003cp\u003eCompared to the 991’s stock intercoolers, the AWE ColdFront™ Intercoolers’ cores are 17% larger (523 cubic inches vs 448 cubic inches). In contrast to the stock cores, AWE Porsche 991TT ColdFront™ Intercoolers are a high flow bar and plate style, and are built to our charge row and fin count specifications. These specifications result in 20% reduced air temperatures and 50% improved pressure resistance through the cores. These lowered air temperatures and freer flow allowed the AWE Porsche 991 Turbo S to achieve dyno-verified max gains of 26 HP and 21 ft-lbs of torque at the crank when used with the \u003ca href=\"http:\/\/www.awe-tuning.com\/awe-tuning-porsche-991-turbo-performance-exhaust\" target=\"_blank\"\u003eAWE 991 Turbo Performance Exhaust\u003c\/a\u003e and \u003ca href=\"http:\/\/www.awe-tuning.com\/991tt-s-flo-carbon-intake\" target=\"_blank\"\u003eS-FLO Carbon Intake\u003c\/a\u003e, and G.I.A.C Stage 2 software, translating to almost a full second reduction in 60-130mph acceleration times.\u003c\/p\u003e\n\u003ch4\u003eMore Carbon Fiber.\u003c\/h4\u003e\n\u003cp\u003eWe’ve designed the biggest cores the 991TT rear fenders could fit, and as a result of the size difference, the OEM ducts couldn’t be utilized. To feed fresh, cooler air to the intercooler cores, proper flowing ducts are mandatory. Cue AWE Carbon Fiber ducts. The result: straightforward and bolt-in, seamlessly mating to the ColdFront™ Intercooler Kit for Porsche 991TT. No trimming or cutting necessary, and the AWE Fitment Guarantee.\u003c\/p\u003e\n\u003ch4\u003eInstallation Hardware:\u003c\/h4\u003e\n\u003cp\u003eIn addition to the superior core and end tank design, the AWE ColdFront™ Intercooler Kit for the Porsche 991TT also features thick wall 6-ply silicone hoses with gentle curves to prevent bursting under pressure. They are attached to the factory intake and turbos by stainless steel high-force t-bolt clamps, and a molded lip is integrated where the hoses meet the turbos to duplicate the factory locking mechanism. Further, our hoses use a Nomex braiding, instead of more common polyester, for superior strength. The very best materials and industry-leading engineering separate this kit from all others on the market.\u003c\/p\u003e\n\u003cp\u003eWhether you’re simply running enhanced software, or planning on a larger turbo upgrade for your car, the AWE ColdFront™ Intercoolers for the Porsche 991TT are exactly what you need to deliver proven, consistent power.\u003c\/p\u003e\n\u003cp\u003ePlease note, the AWE ColdFront™ Intercooler Kit for the Porsche 991TT is \u003cem\u003efor racing use only.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eInstall Instructions can be found \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_awe_991tt_tts_intercoolers.pdf\" rel=\"noopener noreferrer\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_awe_991tt_tts_intercoolers.pdf\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":12543926566967,"sku":"4510-11050","price":3171.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/new_10.webp?v=1726975624"},{"product_id":"awe-tuning-performance-intercooler-997-turbo-gt2-4510-11046","title":"AWE Tuning Performance Intercooler - 997 Turbo \/ GT2","description":"\u003cp\u003e\n\t\n\u003c\/p\u003e\nDuring development of our high horsepower turbos kits for the 997TT, we experienced excessively high intake air temperatures. Upon close examination of the stock intercoolers, we found they matched the same specs as the 996TT X50\/GT2 design, which is suitable to 600hp, but not much beyond that.\n\u003cbr\u003e\u003cbr\u003eSince an OEM option was not available, and our power goals were well north of 700hp, we undertook the task to construct a completely new intercooler system. As with all our intercoolers, a cast end tank was designed in house using sophisticated CAD (Computer Aided Design) and CFD (Computational Fluid Dynamics) software. Once the end tanks were cast by the foundry, they were then machined on our CNC mill, welded to specially designed cores, and then power tested and refined on our chassis dynamometer.\n\u003cbr\u003e\u003cbr\u003eCompared to stock, our cores are 37% larger (422 cubic inches vs 308 cubic inches). In contrast to the stock cores, ours are a high flow bar and plate style and are built to our charge row and fin count specs. These specifications resulted in improved intake temperatures by a massive 55F and improved drop pressure resistance through the core by 1 psi. Considering that extremely little trimming is involved to fit such effective units to the car, this is a huge engineering feat.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUnique Highlights of our kit design:\u003c\/b\u003e\n\u003cbr\u003eEfficient bar\/plate core style\n\u003cbr\u003eCast and machined end tanks for optimized air flow\n\u003cbr\u003eThick silicone boost hoses with proper profile where they mate to turbo\n\u003cbr\u003eChoice of Black, Blue, or Red hoses\n\u003cbr\u003eT-bolt clamps for extreme clamping force\n\u003cbr\u003eDirect plug and play install that is easily reversible\n\u003cbr\u003e+16 crank hp dyno verified\n\u003cbr\u003e\u003cbr\u003eIn addition to the superior core and end tank design, our kit also features 6-ply silicone hoses with gentle curves to prevent bursting under pressure. They are attached to the intake and turbos by stainless steel high force t-bolt clamps, and a molded lip is integrated where the hoses meet the turbos to imitate the factory locking mechanism. Further, our hoses use a Nomex braiding for superior strength, instead of more common polyester. The very best materials and industry leading engineering separate this kit from all others on the market.\n\u003cbr\u003e\u003cbr\u003eWhether you are simply running enhanced software, or are planning on a larger turbo upgrade for your car, our intercoolers solve all heat related issues that come with more turbo boost. Keeping your intake air temperatures low results in more power, better engine output stability when outside temps climb, and the safety margin needed when pushing the limit. \u003cbr\u003e\u003cbr\u003ePlease note, the AWE Tuning Performance Intercooler is \u003ci\u003efor racing use only\u003c\/i\u003e.\u003cbr\u003e\u003cbr\u003eInstall Instructions can be found \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/AWE_997TT_intercoolers_2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":12543926894647,"sku":"4510-11046","price":1561.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/4510-11046.jpg?v=1790013370"},{"product_id":"awe-tuning-performance-intercoolers-997-2-turbo-4510-11044","title":"AWE Tuning Performance Intercoolers - 997.2 Turbo","description":"\u003cp\u003eDuring development of our high horsepower turbos kits for the 997TT, we experienced excessively high intake air temperatures. Upon close examination of the stock intercoolers, we found they matched the same specs as the 996TT X50\/GT2 design, which is suitable to 600hp, but not much beyond that.\u003c\/p\u003e\n\u003cp\u003eSince an OEM option was not available, and our power goals were well north of 700hp, we undertook the task to construct a completely new intercooler system. As with all our intercoolers, a cast end tank was designed in house using sophisticated\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/AWE_997_996_IC_CAD.jpg\" target=\"_blank\"\u003eCAD (Computer Aided Design)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/AWE_997_996_IC_CFD.jpg\" target=\"_blank\"\u003eCFD (Computational Fluid Dynamics)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003esoftware. Once the end tanks were cast by the foundry, they were then machined on our CNC mill, welded to specially designed cores, and then power tested and refined on our chassis dynamometer.\u003c\/p\u003e\n\u003cp\u003eCompared to stock, our cores are 37% larger (422 cubic inches vs 308 cubic inches). In contrast to the stock cores, ours are a high flow bar and plate style and are built to our charge row and fin count specs. These specifications resulted in improved intake temperatures by a massive 55F and improved drop pressure resistance through the core by 1 psi. Considering that\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/AWE_997TT_intercoolers_2.pdf\" target=\"_blank\"\u003eextremely little trimming\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eis involved to fit such effective units to the car, this is a huge engineering feat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnique Highlights of our kit design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEfficient bar\/plate core style\u003c\/li\u003e\n\u003cli\u003eCast and machined end tanks for optimized air flow\u003c\/li\u003e\n\u003cli\u003eThick silicone boost hoses with proper profile where they mate to turbo\u003c\/li\u003e\n\u003cli\u003eT-bolt clamps for extreme clamping force\u003c\/li\u003e\n\u003cli\u003eDirect plug and play install that is easily reversible\u003c\/li\u003e\n\u003cli\u003e+16 crank hp dyno verified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn addition to the superior core and end tank design, our kit also features 6-ply silicone hoses with gentle curves to prevent bursting under pressure. They are attached to the intake and turbos by stainless steel high force t-bolt clamps, and a molded lip is integrated where the hoses meet the turbos to imitate the factory locking mechanism. Further, our hoses use a Nomex braiding for superior strength, instead of more common polyester. The very best materials and industry-leading engineering separate this kit from all others on the market.\u003c\/p\u003e\n\u003cp\u003eWhether you are simply running enhanced software, or are planning on a larger turbo upgrade for your car, our intercoolers solve all heat-related issues that come with more turbo boost. Keeping your intake air temperatures low results in more power, better engine output stability when outside temps climb, and the safety margin needed when pushing the limit.\u003cbr\u003e\u003cbr\u003ePlease note, AWE Tuning Porsche 997.2TT Performance Intercoolers are \u003ci\u003efor racing use only\u003c\/i\u003e.\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":12543926665271,"sku":"4510-11044","price":1650.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/4510-11044.jpg?v=1790013370"},{"product_id":"awe-tuning-audi-2-7t-intercooler-carbon-fiber-shrouds-shrouds-only-set-of-two-4510-11042","title":"AWE Tuning Audi 2.7T Intercooler Carbon Fiber Shrouds - Shrouds Only, Set of Two","description":"\u003cp\u003e\u003cbr\u003eThese are for replacement or upgraded Carbon Fiber shrouds only, and does not include an intercooler.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"short-description\"\u003e\n\u003cul\u003e\n\u003cli class=\"short-description\"\u003eMaximum side mount dimension\u003c\/li\u003e\n\u003cli class=\"short-description\"\u003eAWE designed carbon fiber shrouds\u003c\/li\u003e\n\u003cli class=\"short-description\"\u003eExtremely efficient air-to-air design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"value-props\"\u003e\n\u003cdiv class=\"value-prop\"\u003e\n\u003cdiv class=\"value-prop__img-wrapper\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"value-props\"\u003e\n\u003cdiv class=\"value-prop\"\u003e\n\u003cdiv class=\"value-prop__img-wrapper\"\u003e\n\u003cp\u003ePresenting the AWE Tuning Audi 2.7T Performance Intercooler Kit. Cast End Tanks. Carbon Fiber Shrouds. Backed by AWE Tuning R\u0026amp;D. If you’re serious about consistent and proven power, read on.\u003cbr\u003e \u003c\/p\u003e\n\u003ch4\u003eWhy we developed this kit\u003c\/h4\u003e\n\u003cp\u003eThe stock 2.7T intercoolers become a power handicap at high boost levels, which is not surprising considering that the stock 2.7T boost level is just 8-9 psi. Every performance software on the market, let alone an upgraded turbo kit, runs almost double this boost level. This results in tangible power losses, especially when outside temperatures rise.\u003c\/p\u003e\n\u003cp\u003eWhen investigating intercoolers, ask for data that demonstrates how the kit will perform at 20psi boost levels, which is the norm for most current 2.7T turbo kits. If you are running less boost than this, then you can rest assured that there is sufficient headroom in the design should you decide to upgrade turbos one day.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAbout the AWE Tuning Audi 2.7T Performance Intercooler Kit\u003c\/h4\u003e\n\u003cp\u003eThe tested AWE Tuning Audi 2.7T Performance Intercooler Kit design uses a closely stacked bar and plate type core, to minimize pressure drops while maximizing heat transfer. Our design target was to exceed the cooling and flow capabilities of Audi RS4 intercoolers -- and through this proven design, we have accomplished this (See detailed test results in the Performance Specs tab). In summary, the AWE Tuning Audi 2.7T Performance Intercooler equals the RS4 intercooler flow rates, and definitively conquers the RS4 intercooler temperature drops.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTested. Hard.\u003c\/h4\u003e\n\u003cp\u003eThe construction of the AWE Tuning Audi 2.7T Performance Intercooler Kit is of the highest quality - Efficient cast end tanks are used to ensure maximum flow, and each intercooler assembly is pressure checked before it leaves our manufacturing facility. And in 2012, AWE Tuning introduced carbon fiber shrouds to the mix, producing a lighter, and more aesthetically appealing kit as well.\u003c\/p\u003e\n\u003cp\u003eThe bulk of our side mount intercooler testing was conducted on S4s with the AWE Tuning RSK04 kit installed. This is important to consider, given that as boost rises, so will boost drop due to core restriction. Thus, an intercooler can perform well at relatively low boost levels, but can begin to perform worse than stock if the boost drop is high enough to negate any gains seen from temperature drops.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eNot only did we want the AWE Tuning Audi 2.7T Performance Intercooler Kit to be clearly superior to the RS4 unit performance, but we also wanted to take the opportunity to design a kit that required very little modification to the US spec Audi 2.7T models during fitment. The RS4 intercooler units are made to fit the Europe only RS4, and mating them to a US spec 2.7T model requires significant cutting of both the intercoolers and the vehicle itself. Our design can be fitted in less than half the time of the typical RS4 kit. This means paying less for labor charges.\u003c\/p\u003e\n\u003cp\u003eSince RS4 units were never intended to be used on the US S4 chassis, extensive modifying or tweaking of the areas around the intercoolers is needed to force fitment. The AWE Tuning Audi 2.7T Performance Intercooler Kit was designed and built to fit the US S4 chassis, resulting in a much better, cleaner fit with very little modification required.\u003c\/p\u003e\n\u003cp\u003eSome key fitment detail differences between the AWE Tuning Audi 2.7T Performance Intercooler Kit and the RS4 \"kits:\"\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% coverage of the core face with AWE Tuning Carbon Fiber air ducts. RS4 kits leave gaps around face that lets cooling air escape\u003c\/li\u003e\n\u003cli\u003eNo modification needed to the engine belly tray with our design\u003c\/li\u003e\n\u003cli\u003eCores are secure and supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eminor trimming may be required. Be sure to refer to the installation instructions in the tab above\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cp\u003eThe AWE Tuning Audi 2.7T Performance Intercooler Kit comes complete with two AWE Tuning Performance Intercoolers, AWE Tuning carbon fiber shrouds (air ducts) and a detailed installation manual. No specialty tools are required for install.\u003c\/p\u003e\n\u003cp\u003eThe AWE Tuning carbon fiber shrouds are also available independently, should you already have the AWE Tuning Audi 2.7T Performance Intercooler Set and like to upgrade your shrouds to carbon fiber.\u003c\/p\u003e\n\u003cp\u003eQuestions? Audi performance specialists are standing by at 1.888.565.2257, 215.658.1670 or performance@AWE-Tuning.com.\u003c\/p\u003e\n\u003cp\u003ePlease note, theAWE Tuning Audi 2.7T Performance Intercooler Kit is for racing use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** NOTE:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIn order to fit A6 or allroad models, minimal trimming of the bumper and shrouds is necessary.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eInstall Instructions can be found \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_AWE_27t_intercoolers.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":12543926632503,"sku":"4510-11042","price":389.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/products\/carbonshrouds.png?v=1574702768"},{"product_id":"awe-tuning-q5-2-0t-front-mounted-intercooler-4510-11024","title":"AWE Tuning Q5 2.0T Front Mounted Intercooler","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduce Intake Temps by at least 25%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces intercooler heat soak\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFits securely behind stock crash bar\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReuses OE hoses \u0026amp; clamps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect Fitment - Guaranteed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDuring development of our 2.0T Q5 Exhaust systems and G.I.A.C. software, we recorded high intake air temperatures. The stock front mount intercooler isn't able to effectively cool the intake charge at that performance level, allowing temperatures to rise and hurt performance as rpms increase. With this in mind, we set out to develop our Q5 Front Mount Intercooler in order to bring intake temperatures back under control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll aluminum construction for maximum heat transfer\u003c\/li\u003e\n\u003cli\u003eEfficient bar\/plate core construction\u003c\/li\u003e\n\u003cli\u003eCast aluminum end tanks with inlet baffle\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel bent aluminum tubing\u003c\/li\u003e\n\u003cli\u003ePressure checked assembly before leaving our factory\u003c\/li\u003e\n\u003cli\u003eNo effect on OE radiator or A\/C systems\u003c\/li\u003e\n\u003cli\u003eFits securely behind stock crash bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe employed sophisticated Computer Aided Design (CAD) modeling software to design an intercooler that uses an end tank \/ core package significantly larger than stock while striving to re-use the robust factory hoses and clamps to keep costs down. This end tank design is a proven winner and is in use on multiple platforms. We went through no less then 14 revisions when initially developing it.\u003c\/p\u003e\n\u003cp\u003eWhile we knew this engine ran very hot, and could really benefit from improved intercooling, the test results shocked even us. Our FMIC was able to reduce Intake Air Temperatures (IATs) by a maximum of 31 degrees F over stock, a difference of nearly 25%! The massive drop in IATs will yield even better performance in warmer climates and higher power applications.\u003c\/p\u003e\n\u003cp\u003eWhether you are simply running enhanced software, or are planning on a larger turbo upgrade for your car, our intercooler solves all heat related issues that come with more turbo boost. Keeping your intake air temperatures low results in more power, better engine output stability when outside temps climb, and the safety margin needed when pushing the limit.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCurrently not available for vehicles equipped with Audi Drive Select.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, the AWE Performance Front Mounted Intercooler is \u003cem\u003efor racing use only.\u003c\/em\u003e\u003cbr\u003eInstall Instructions can be found \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_awe_q5_20T_FMIC_8a558da4-8da1-49ec-bf85-c8bf8211633d.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":12543926272055,"sku":"4510-11024","price":1096.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/4510-11024_1.1.webp?v=1726975772"},{"product_id":"awe-tuning-coldfront-intercooler-b9-audi-s4-s5-3-0t-4510-11060","title":"AWE Tuning ColdFront Intercooler - Audi \/ B9 \/ 2.0T \/ 3.0T","description":"\u003ch2\u003eCool to the core. Presenting the AWE ColdFront™ Intercooler for the Audi B9 A4\/A5 2.0T \u0026amp; S4\/S5 3.0T.\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e130% increase in frontal surface area over stock\u003c\/li\u003e\n\u003cli\u003e83% increase in volume over stock\u003c\/li\u003e\n\u003cli\u003eFits securely behind the stock crash bar, pure bolt-on\u003c\/li\u003e\n\u003cli\u003eAll aluminum construction for maximum heat transfer\u003c\/li\u003e\n\u003cli\u003eEfficient bar and plate core construction\u003c\/li\u003e\n\u003cli\u003eCast aluminum end tanks with integrated internal baffling for even flow across core\u003c\/li\u003e\n\u003cli\u003eCAD designed and CFD tested to ensure optimized flow in and out of core\u003c\/li\u003e\n\u003cli\u003eTIG welded and pressure tested assembly before leaving our facility\u003c\/li\u003e\n\u003cli\u003eNo effect on OE radiator or A\/C systems\u003c\/li\u003e\n\u003cli\u003eUtilizes factory hoses and clamps\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in-house at AWE\u003c\/li\u003e\n\u003cli\u003ePerfect fitment, guaranteed\u003c\/li\u003e\n\u003cli\u003eAWE No Check Engine Light Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe AWE ColdFront™ Intercooler: \u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eCast aluminum end tanks with internal baffling and a robust bar\/plate aluminum core for maximum heat transfer render a 130% increase in frontal surface area and a massive 83% increase in volume over the factory B9 intercooler.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRegardless if your vehicle is producing higher-than-stock boost levels, or you’re keeping it within factory spec, the ColdFront™ Intercooler solves any potential heat-related issues. By keeping intake air temperature low, and pressure drop at a minimum, engine output remains consistent even when outside temperatures rise. The ColdFront™ will provide the safety margin needed in order for you to push the limit with confidence.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eImportant fitment notes\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThere is no cutting required when installing this intercooler. The ColdFront™ Intercooler reuses the factory intercooler hoses and clamps.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat’s in the box?\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eComplete AWE ColdFront™ Intercooler with all necessary hardware required for proper installation.\u003cbr\u003e\u003cbr\u003eInstall Instructions can be found \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/install_instructions_awe_b9_s4_s5_fmic.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":13481572794423,"sku":"4510-11060","price":845.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/products\/4510-11060_4.jpg?v=1761240358"},{"product_id":"awe-performance-intercooler-kit-with-carbon-fiber-shrouds-audi-2-7t-4510-11040","title":"AWE Performance Intercooler Kit with Carbon Fiber Shrouds | Audi 2.7T","description":"\u003cul\u003e\n\u003cli class=\"short-description\"\u003eBringing carbon fiber and class-leading cooling to the 2.7L\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"short-description\"\u003eNo Check Engine Light - Guaranteed\u003c\/li\u003e\n\u003cli class=\"short-description\"\u003eDyno engineered, track tested and approved\u003c\/li\u003e\n\u003cli class=\"short-description\"\u003eDesigned, engineered, and tested in-house at AWE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePresenting the AWE Audi 2.7T Performance Intercooler Kit. Cast End Tanks. Carbon Fiber Shrouds. Backed by AWE R\u0026amp;D. If you’re serious about consistent and proven power, read on.\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhy we developed this kit:\u003c\/h4\u003e\n\u003cp\u003eThe stock 2.7T intercoolers become a power handicap at high boost levels, which is not surprising considering that the stock 2.7T boost level is just 8-9 psi. Every performance software on the market, let alone an upgraded turbo kit, runs almost double this boost level. This results in tangible power losses, especially when outside temperatures rise.\u003c\/p\u003e\n\u003cp\u003eWhen investigating intercoolers, ask for data that demonstrates how the kit will perform at 20psi boost levels, which is the norm for most current 2.7T turbo kits. If you are running less boost than this, then you can rest assured that there is sufficient headroom in the design should you decide to upgrade turbos one day.\u003c\/p\u003e\n\u003ch4\u003eAbout the AWE Audi 2.7T Performance Intercooler Kit:\u003c\/h4\u003e\n\u003cp\u003eThe tested AWE Audi 2.7T Performance Intercooler Kit design uses a closely stacked bar and plate type core, to minimize pressure drops while maximizing heat transfer. Our design target was to exceed the cooling and flow capabilities of Audi RS4 intercoolers -- and through this proven design, we have accomplished this (See detailed test results in the Performance Specs tab). In summary, the AWE Audi 2.7T Performance Intercooler equals the RS4 intercooler flow rates, and definitively conquers the RS4 intercooler temperature drops.\u003c\/p\u003e\n\u003ch4\u003eTested. Hard.\u003c\/h4\u003e\n\u003cp\u003eThe construction of the AWE Audi 2.7T Performance Intercooler Kit is of the highest quality - Efficient cast end tanks are used to ensure maximum flow, and each intercooler assembly is pressure checked before it leaves our manufacturing facility. And in 2012, AWE introduced carbon fiber shrouds to the mix, producing a lighter, and more aesthetically appealing kit as well.\u003c\/p\u003e\n\u003cp\u003eThe bulk of our side mount intercooler testing was conducted on S4s with the AWE RSK04 kit installed. This is important to consider, given that as boost rises, so will boost drop due to core restriction. Thus, an intercooler can perform well at relatively low boost levels, but can begin to perform worse than stock if the boost drop is high enough to negate any gains seen from temperature drops.\u003c\/p\u003e\n\u003ch4\u003eFitment:\u003c\/h4\u003e\n\u003cp\u003eNot only did we want the AWE Audi 2.7T Performance Intercooler Kit to be clearly superior to the RS4 unit performance, but we also wanted to take the opportunity to design a kit that required very little modification to the US spec Audi 2.7T models during fitment. The RS4 intercooler units are made to fit the Europe only RS4, and mating them to a US spec 2.7T model requires significant cutting of both the intercoolers and the vehicle itself. Our design can be fitted in less than half the time of the typical RS4 kit. This means paying less for labor charges.\u003c\/p\u003e\n\u003cp\u003eSince RS4 units were never intended to be used on the US S4 chassis, extensive modifying or tweaking of the areas around the intercoolers is needed to force fitment. The AWE Audi 2.7T Performance Intercooler Kit was designed and built to fit the US S4 chassis, resulting in a much better, cleaner fit with very little modification required.\u003c\/p\u003e\n\u003cp\u003eSome key fitment detail differences between the AWE Audi 2.7T Performance Intercooler Kit and the RS4 \"kits:\"\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% coverage of the core face with AWE Carbon Fiber air ducts. RS4 kits leave gaps around face that lets cooling air escape\u003c\/li\u003e\n\u003cli\u003eNo modification needed to the engine belly tray with our design\u003c\/li\u003e\n\u003cli\u003eCores are secure and supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eminor trimming may be required. Be sure to refer to the installation instructions in the tab above.\u003c\/p\u003e\n\u003ch4\u003eOptions:\u003c\/h4\u003e\n\u003cp\u003eThe AWE Audi 2.7T Performance Intercooler Kit comes complete with two AWE Performance Intercoolers, AWE carbon fiber shrouds (air ducts) and a detailed installation manual. No specialty tools are required for install.\u003c\/p\u003e\n\u003cp\u003eThe AWE carbon fiber shrouds are also available independently, should you already have the AWE Audi 2.7T Performance Intercooler Set and like to upgrade your shrouds to carbon fiber.\u003c\/p\u003e\n\u003cp\u003ePlease note, the AWE Audi 2.7T Performance Intercooler Kit is for racing use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** NOTE:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eIn order to fit A6 or allroad models, minimal trimming of the bumper and shrouds is necessary.\u003c\/p\u003e\n\u003cp class=\"product-grouped-search-terms\"\u003e \u003c\/p\u003e\n\u003cp\u003eInstall Instructions can be found \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_AWE_27t_intercoolers.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":31480925257783,"sku":"4510-11040","price":872.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/products\/w_450d2b95-cd7a-45a7-b165-94cfc5656a3f.jpg?v=1576857060"},{"product_id":"awe-tuning-coldfront-intercooler-audi-b9-sq5-4510-11062","title":"AWE Tuning Coldfront Intercooler | Audi B9 SQ5","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCool to the core. Presenting the AWE ColdFront™ Intercooler for the Audi B9 SQ5 3.0T.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e130% increase in frontal surface area over stock\u003c\/li\u003e\n\u003cli\u003e83% increase in volume over stock\u003c\/li\u003e\n\u003cli\u003eFits securely behind the stock crash bar, pure bolt-on\u003c\/li\u003e\n\u003cli\u003eAll aluminum construction for maximum heat transfer\u003c\/li\u003e\n\u003cli\u003eEfficient bar and plate core construction\u003c\/li\u003e\n\u003cli\u003eCast aluminum end tanks with integrated internal baffling for even flow across core\u003c\/li\u003e\n\u003cli\u003eCAD designed and CFD tested to ensure optimized flow in and out of core\u003c\/li\u003e\n\u003cli\u003eTIG welded and pressure tested assembly before leaving our facility\u003c\/li\u003e\n\u003cli\u003eNo effect on OE radiator or A\/C systems\u003c\/li\u003e\n\u003cli\u003eUtilizes factory hoses and clamps\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in-house at AWE\u003c\/li\u003e\n\u003cli\u003ePerfect fitment, guaranteed\u003c\/li\u003e\n\u003cli\u003eAWE No Check Engine Light guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe AWE ColdFront™ Intercooler\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eCast aluminum end tanks with internal baffling and a robust bar\/plate aluminum core for maximum heat transfer render a 130% increase in frontal surface area and a massive 83% increase in volume over the factory B9 SQ5 intercooler.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eRegardless if your vehicle is producing higher-than-stock boost levels, or you’re keeping it within factory spec, the ColdFront™ Intercooler solves any potential heat-related issues. By keeping intake air temperature low, and pressure drop at a minimum, engine output remains consistent even when outside temperatures rise.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe ColdFront™ will provide the safety margin needed in order for you to push the limit with confidence.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eImportant fitment notes\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eThere is no cutting required when installing this intercooler. The ColdFront™ Intercooler reuses the factory intercooler hoses and clamps.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat’s in the box?\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eComplete AWE ColdFront™ Intercooler with all necessary hardware required for proper installation.\u003c\/p\u003e\n\u003cp\u003e   \u003cbr\u003e\u003cbr\u003eInstall Instructions can be found \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_awe_mk7_gli-exhaust.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":37775304065217,"sku":"4510-11062","price":845.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/products\/awe_b9_sq5_coldfront_fmic_offcar_2.jpg?v=1726002158"}],"url":"https:\/\/www.urotuning.com\/collections\/awe-tuning-intercoolers.oembed","provider":"UroTuning","version":"1.0","type":"link"}