Fuel-It! BMW F-Series Fuel Line and Ethanol Sensor Upgrades


$145.95

Part# FT-FL-FN55U

In Stock Direct Ship

Does This Fit Your Car?

We currently offer four options to upgrade the fuel feed lines on your and N55 equipped 135i, 235i, 335i, F-series BMW. All fuel lines upgrades are 3/8" (AN6) and E85 compatible. In addition we utilize our own custom fittings made specifically for your BMW so that you can maintain the stock connections at the HPFP, the tank, and the ethanol sensor should you choose to install one.

  • HPFP to the Tank:
    • This upgrade replaces both stock fuel lines with one upgraded countinous fuel line from the fuel tank to the HPFP.
  • HPFP to the Tank with Ethanol Sensor:
    • For those that want to run ethanol, we also offer this upgrade with an integrated ethanol sensor.
  • Port Injection to the Tank:
    • If you are running port injection, this upgrade replaces the stock fuel lines from the tank to the engine bay and then utilizes a Y adapter to supply the HPFP and PI with fuel. This removes those tee's and extra fittings for a cleaner high flow setup.
  • Port Injection to the Tank with Ethanol Sensor:
    • For those that want to run ethanol, we also offer this upgrade with an integrated ethanol sensor.
  • Non-Fuel-It! port injection to tank
    • If you are running a port injection kit that we did not manufacture and want to upgrade your fuel lines, this upgrade replaces the stock fuel lines from the tank to the engine bay and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. This kit includes a longer 18" feedline from the Y to the port injection rail. You can then cut the feed line to length and then install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail.
  • Non-Fuel-It! port injection to the Tank with Ethanol Sensor:
    • For those that want to run ethanol, we also offer this upgrade with an integrated ethanol sensor.

*Note: An ethanol analyzer must be used in conjunction with the ethanol sensor to read your ethanol content.
There are three options to read your ethanol content when using our ethanol analyzers:

  • Bluetooth only
  • Bluetooth and JB4 integrated (0-5 Volt)
  • Bluetooth and 50-150hz Raw Signal

*These kits are available for off-road use only

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.

PLEASE CONTACT US IF YOU DON'T SEE THE OPTION YOU NEED OR WITH ANY QUESTIONS YOU HAVE!

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Can't find what you're looking for?
Odds are we can get it! Click Here Now