AWE Tuning C7.5 Audi A6 3.0T Touring Edition Exhaust


ON SALE $2,205.26
$1,995.00

UroTuning

Part# 3015-42072


Does This Fit Your Car?

NOTE: The C7.5 is 2016+ A6 models only.

The AWE Tuning C7.5 A6 3.0T Touring Edition Exhaust is somethonaling special.

AWE Tuning C7.5 Audi A6 3.0T Touring Edition Exhaust and Downpipe system highlights

  • Featuring AWE Tuning 180 Technology
  • AWE Tuning Quad Tips perfectly fill in the OE valance
  • Available as Touring Edition Exhaust with downpipes, or as just the Touring Edition Exhaust System
  • Direct Bolt on
  • Max power gains of 12hp and 11tq at the crank
  • Peak power gains of 10hp and 3tq at the crank
  • Does not affect or alter emissions devices, completely street legal
  • No Check Engine Light Guarantee
  • Lifetime Exhaust Warranty

The product suite

The AWE Tuning C7.5 Audi A6 Touring Edition Exhaust System comes in a Quad tip outlet configuration, featuring 102mm slash cut tips on each side of the vehicle, designed to work with the factory rear valance. The tips are double walled to ensure a mirror finish even under hard usage. Each tip is individually adjustable, so stagger and depth into bumper can be set according to personal taste.

Available as:

Touring Edition Exhaust with resonated downpipes. Touring Edition Exhaust alone (no downpipes). About the downpipes

We also offer the AWE Tuning A6 3.0T Touring Edition Exhaust with our Resonated Downpipes. The AWE Tuning Resonated Downpipes feature resonators larger than the stock units in order to produce a mellow sound volume. Our Resonated Downpipes feature larger than stock tubing diameter.

Downpipe installation tip

Installing downpipes on these cars is arduous given the placement of the factory bolts. We had so much trouble that we made an AWE Tuning-grade tool to make it easier. If you're planning an install, our Downpipe Removal Tool is a must have.

Sound Perfection: AWE Tuning 180 Technology

The tone that was accomplished for the A6 can be partially attributed to AWE Tunings 180 Technology.

As exhaust gases exit the 3.0T engine and flow into an AWE Tuning 180 Technology equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. More on AWE Tuning 180 Technology in the video below!

Whats in the box?

The AWE Tuning C7.5 A6 3.0T Touring Edition Exhaust includes all necessary hardware, including under chassis brace spacers and hardware, aluminum collars, wrench, Accu-Seal and T-Bolt clamps.

Part numbers: 3215-11030, 6510-11012, 3015-42072, 3015-43076


























Recently Viewed Products