Both of our seat delete kits are constructed of USA-made formaldehyde-free plywood, 3D printed ABS composite brackets and UV resistant automotive carpet.
They are built to be used: Load up your track tires, give your dogs space to stretch out, or haul materials from the home center. Rated for 200 lbs of cargo spread evenly.
No cutting or drilling is needed for install. Once the stock seat is removed, this installs in less than 10 minutes. Some assembly is needed the first time you unbox the kit. Hardware is included and predrilled holes are provided to make this initial assembly quick and easy (see install sheet for details).
Both kits clip onto the factory seat pins with a custom-made bracket and have an M6 bolt to retain each side. With this mounting solution, the entire panel can be lifted up so you can access the fuel pump, store tools, and hide valuables underneath (both rear doors need to be open). The front edge of the delete kit does not bolt in, it is only held in place with gravity to allow for the tilting feature. But don't worry, it is heavy enough to not rattle or vibrate even on a stage 3 car with upgraded motor mounts. All of the edges that make contact with the body of the car is wrapped in fabric or rubberized trim to prevent scratching.
Seat Delete Weights:
- Flat: 15lbs
- Slanted: 12lbs
The MK7 60/40 split rear seat assembly weighs 58.8lbs.
- 31 lbs - Double Back
- 12.5 lbs - Single back
- 12.3 lbs - bottom
- 3lbs - headrests
With both kits you are keeping function, aesthetics and shaving over 40lbs compared to the stock seat assembly!
The carpet we use is UV resistant and similar to the factory color, however it is not a perfect match. Please review the pictures to see the slight variation. Please note that the slanted version does leave a small gap that is visible with the rear doors open. See pictures.
⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov