M7 Speed N14 High Flow Intake & Intercooling Hose Bundle Kit | 56-314301

FEED YOUR MACHINE MORE AIR | MAKE MORE POWER

Improve the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo Charge Pipe and the Cold Side Elbow Kit. Offered four M7 colors (BLACK, RED, BLUE and GREEN). These are direct bolt-on high performance parts offering superior durability, much better airflow and virtually unlimited service life.  In addition to outstanding performance they look super cool and adds to the under hood WOW factor your MINI so desperately needs.

INTAKE HOSE

Unlike other similar hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size allowing the OE hose and connector to be installed without any modifications.  This includes no disruption of the PCV electrical connection eliminating any chance of initiating a DTC code (Check Engine Light). The kit comes complete with three properly sized stainless steel clamps and easy to follow installation instructions. Please note this part only fits MINIs equipped with the N14 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover.  Vehicles with one large PCV vent hose and one small secondary PCV hose will use a different part number. Coming Soon.

 FEATURES

• Made from 100% Silicone materials resistant to oil and most chemical damage.
• Designed for high temperature {300^oF [149^oC]} continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor. 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

HOT-SIDE TURBO CHARGE PIPE

The M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. 

With the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!


On the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque AT THE WHEELS!

COLD SIDE INTERCOOLER ELBOW KIT

Made from the same high quality four (4) ply fabric reinforced 100% silicone material; same as our very popular hot side intercooler pipe. These high flow elbows and interconnecting aluminum tube are 61% larger in cross sectional area than the factory OE pipe which means smoother intake flow, less pressure drop and more available power from the engine. It also adds a handsome finished under hood appearance to your pride and joy and eliminates high boost failures seen when using the OE parts. And finally the M7 kit eliminates the OE sound chamber increasing throttle response and greater mid-range to top-end power.

The kit comes complete with four (4) high quality lined stainless steel clamps, two (2) custom formed silicone elbows and one (1) interconnecting aluminum tube with slip proof retaining beads. Easy to install by any moderately skilled DIY’er using basic hand tools.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov