Spec Clutch Performance Kits - VW Mk1 | Mk2 16v | SV271
Upgraded clutch kit WITHOUT flywheel
Torque Recommendations (Measured at the Flywheel):
Stage 1 | Stage 2 | Stage 2+ | Stage 3 | Stage 3+ | Stage 4 | Stage 5 | |
Kit Part Number: | SV271 | SV272 | SV273H | SV273 | SV273F | SV274 | SV275 |
Torque Capacity: | 272 | 305 | 329 | 400 | 359 | 460 |
Stages 1-3+ recommended for street/strip Stages 4-5 Race only.
*Clutch Kit Notes: SV21A allows use of 228mm VR6 style clutch kits, p/n prefix SV36, with 02A transmission only.*
Stage 1: Street, Drag, Drift, Road Race, Rally, Pulling, Autocross
Stage 1 Clutch Kits feature an integrally molded carbon Kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub comes in either Sprung or Rigid and is application dependent. The double sprung hub features spring cover relieves for flexibility and both hubs use heat treated components for strength and durability. Best for street and many track/off-road applications.
Stage 2: Street, Drag, Pulling, Autocross
Features segmented or full faced pure Kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity. The hub comes in either Sprung or Rigid and is application dependent. The double sprung hub features spring cover relieves for flexibility and both hubs use heat treated components for strength and durability. Best for street, drag, pulling and autocross.
Stage 2+: Street, Drag, Pulling, Autocross
Features a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub comes in either Sprung or Rigid and is application dependent. The double sprung hub features spring cover relieves for flexibility and both hubs use heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rally and drift.
Stage 4: Street, Drag, Pulling, Autocross
This unit is a solid hub version of the stage 3. The hub is solid 8-rivet and the assembly is heat treated for strength and durability. It is available in a 3, 4 or 6 puck configuration. Use the 3 puck for the lightest option or the 6 puck for the smoothest engagement. The 4 puck is a good compromise for both. Street drivable in 6 puck configuration, but not street friendly due to the rigid hub. Best for drag racing, road racing, pulling, rally and drift.
Stage 5: Street, Drag, Pulling, Autocross
Stage 5 kits feature a full-metallic disc with the highest possible friction co-efficient. Street drivable but not street-friendly. The hub is solid 12-rivet and the assembly is heat treated for strength and durability. Best for extreme street and drag racing.
⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov