Fuel-It! BMW E-Series FI-650HP Fuel System Upgrade Kit | FT-FK-EN5X

Read Product Details


$0.00

Fuel-It

Part# FT-FK-EN5X

In Stock In Stock
Item is IN STOCK, order now and will ship out within 1 business day!
Ships in 0-2 Days Ships in 0-2 Days
This product usually ships within 2 business days.


If your power goal is 650whp or less and you need to upgrade your fuel system, you've come to the right place!

As these cars get older and less expensive we're seeing more issues with the stock components and more demand for cost-conscious fueling solutions. Our new FI-650HP line of fuel system upgrades are designed with those needs in mind while maintaining a budget. They make the most of the stock components to maintain stock reliability and drive-ability but when the boost gets cranked up, the FI-650HP components kick in to support the additional fueling needs of your high horsepower car. With the FI-650HP lineup, you can upgrade your components all at one time or upgrade them as time and budget allows. If upgrading one component at a time, we'd recommend starting with the LPFP first as that is the heart of your fuel system, without a good LPFP you can't supply the fuel needed to any of your other components.

What are the FI-650HP Port Injection Kits

This new line of port injection upgrades was also developed to support any power level up to the 650whp while maintaining stock reliability with a plug and play kit that is easily removed. These kits are a simple installation that includes our silver anodized spacer, fuel rail, injectors, gaskets, all fittings, and upgraded fuel lines to transform your stock fuel system. All of our fittings are custom designed and made to connect to the stock fuel system so no permanent modifications are needed and installation is kept simple.

What is the FI-650HP LPFP Upgrade

No more iDrive warnings, no more overheated EKP's, and no sending your fuel pumps in for repair or upgrade.

This new line of Low-Pressure Fuel Pump (LPFP) upgrades utilizes the stock pump assembly to meet everyday driving needs but when the boost kicks in, the FI-650HP secondary pump kicks on to support those high boost fueling needs. This system requires no modifications to your stock system, including the bucket, wiring, or stock plumbing so that it is reliable and easily reversible. There is no tearing down your bucket or sending it in to be upgraded. Install only requires adding the additional pump assembly to your fuel tank where it sits side by side with your stock pump assembly and then installing the additional wiring harness. The secondary pump then runs in parallel with the stock pump making use of the stock capacity while adding up to 200% more capacity to your existing system. Doing it this way eliminates any additional strain on your stock wiring and the EKP that runs your stock LPFP.

How do I order?

It's simple, you can order just the LPFP upgrade, the port injection kit, or both by making the appropriate selections in our drop-down menus.

Choose your Engine type:

Select N54 or N55

Choose your platform type:

Select your platform type and take note of platforms restrictions.
If your platform isn't listed, select other and add your platform type to your order notes.

Choose your Port Injection Kit: (Optional)

We have a few options for you to choose from to meet your needs. If you need assistance, email us at sales@urotuning.com.

If you are running a JB4, we recommend you choose a kit with the BMS JB4 controller for easy integration with your JB4

If you are not running a JB4, we recommend that you choose a kit with the Split Second Flash Tune controller

If you plan to experiment and will be changing your tuning preference but are currently running a JB4, select the Split Second JB4 Integrated controller.

If running ethanol, we recommend getting a kit with our ethanol sensor and Bluetooth analyzer integrated.

Choose your LPFP Upgrade: (Optional)

We have a few options for you to choose from to meet your needs. If you need assistance, email us at sales@urotuning.com.

These kits are available with or without a new stock LPFP. If you feel your stock LPFP is worn out and want to make the most of your new fuel system, we'd suggest replacing your stock LPFP as well.

Installing the LPFP upgrade will require that you add two 9/64" power terminals that are included to your tophat. If you are unsure about this or want it done for you, choose an option that includes the new tophat or a completely new stock LPFP assembly.

The secondary pump requires the additional wiring harness. If you already have a harness from a previous system, or wish to make your own harness, you can choose a system that does not include the wiring harness but you MUST have a secondary wiring harness of some kind installed.

Currently have our Stage 2 upgrade and want to upgrade to Stage 3?

This kit can also be added to your current Fuel-It! Stage 2 kit!

Add a Hobb's Switch?

Your secondary pump can NOT run full time, it must only be run under high boost only. Running it full time will place additional strain on the stock system, will lead to high fuel temps, and pump or component failure. To turn the secondary pump on under high boost we recommend running a Hobb's switch or if you are running one of the newer BMS port injection controllers, you can use the thick yellow or orange wire to do this for you.

Do I need a 4psi or 15psi hobb's switch?

You can run either one. We typically recommend the 15psi but if you're making good power/torque at low boost and exceeding the capacity of your stock pump, you'll want to choose the 4psi.

Add a lock ring tool?

Removing the lock ring can be difficult and doing it with a screw driver often leads to a damaged/broken tophat. For this reason we recommend using a lock ring tool to minimize possible damage.

Do you need a return kit with FPR?

This kit eliminates your stock in tank FPR (Fuel Pressure Regulator) and replaces it with an external FPR that has a 1:1 boost reference ratio if you install the included boost reference line. When targeting more than 600whp and running more than 25psi, we recommend adding this kit to make the most of your upgraded fuel system. This requires the installation of a return fitting and 3/8" hole in your tophat. If you are ordering the LPFP upgrade from us with a new tophat, this will be completed for you. If you are using your existing LPFP or tophat, you will need to make this modification and install the fitting.

Included with all port injection kits will be the following:

Port injection spacer with injectors

Fuel-It! silver anodized custom spacer for the intake manifold with angled injectors to eliminate the cylinder 1 offset and improve atomization and distribution
Fuel-It! silver anodized custom fuel rail with integrated brackets

6 flow matched Bosch 550cc injectors
-6an fuel supply port
-6an fuel return port plug
1/8" NPT boost reference port (cyl 6)
Six OEM manifold gaskets
Seven extended length zinc coated bolts
Seven zinc coated washers
Two nylon rail and manifold alignment pins

Upgraded fuel lines

Custom black anodized billet fittings
Custom HPFP fitting with our exclusive Cam-Lock! technology
Custom Y fitting to eliminate all threaded fittings to reduce the potential for leaks
Custom male fitting for the stock filter assembly
E85 compatible 3/8" fuel lines

Ethanol Sensor and Bluetooth Analyzer (optional upgrade)

Continental ethanol sensor
Fuel-It! 0-5 volt and Bluetooth Analyzer
Our custom black anodized Cam-Lock fittings

Included with all LPFP upgrades:

Walbro 450 pump (F90000274)

Optional Walbro 525 pump (F90000285)

Black Anodized Custom fitting

Pump brackets

9/64" terminals and associated hardware

Fuel line

Replacement PITA clip

Wiring harness (optional)

New tophat (optional)

New stock pump assembly (optional)




⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Can't find what you're looking for?
Odds are we can get it! Click Here Now