Connecting Rods Integrated Engineering 1.8T 144X19 Drop-In-Rods VW Audi


$471.99

In Stock Ships 4+ Weeks
UroTuning

Part# IERHVA2-RD


Does This Fit Your Car?

When increasing the power output of an engine, internal parts begin to fail as they are pushed far beyond their limits. Integrated Engineering Forged Connecting Rods are designed to replace the factory units and take the beating from power-adding modifications.

Connecting rods are some of the highest stressed components in an engine and thus require extreme attention to detail to ensure proper operation and reliability. Integrated Engineering ensures the success of your next engine build by putting each set of connecting rods though a rigorous quality control process. For years Integrated Engineering H-beam Rods have been an integral part of delivering the power that the highest powered turbo setups and race engines demand.

Extra attention has been paid to even the smallest details such as the bearing tangs, wrist pin fit, and big end side clearance, providing a level of fit and finish not found anywhere else. Each and every set is finish machined and honed in-house for perfectly round and on size big-end bores, resulting in the industry's lowest failure rates. All rods in this series feature generous wrist pin oiling, and optional rifle drilling. One of the hallmarks of a high quality connecting rod is its strength to weight ratio. In order to create this balance of strength and light weight, our optimized H beam design is utilized and validated using modern CAD drafting and FEA analysis techniques. These techniques ensure the rod is as light and strong as possible, perfected for today's powerful and high rpm European applications.

H BEAM FEATURES:

 

 

H BEAM DESIGN:
The H-beam design is the workhorse of our connecting rod product line. This design features strength, durability, stiffness and rigidity. IE H-beam Connecting Rods are a great upgrade over weaker factory units.


DROP-IN-ROD:
IE drop-in rods are designed to be used with the stock pistons in your engine. No modification is required when swapping out your stock rods with these replacement IE rods. Drop-in rods are the perfect solution when the factory rods must be replaced, but the power limits of the stock pistons have not been reached.

 

 

COMPUTER OPTIMIZED:
All IE rods are designed specifically for the application using relevant cylinder pressure and other application-specific factors. We put our vast European engine knowledge to use when designing each application.

RIFLE DRILLING:
Also referred to as Forced Pin Oiling (FPO), rifle drilling increases wrist pin longevity by providing additional lubrication. This upgrade is highly recommended for street-driven cars that see mileage put on them. Rifle drilling is sold separately on this application.

 

 

HONED IN-HOUSE:
Honing the connecting rod big end in-house on state of the art equipment ensures the tolerances are set correctly to ensure proper bearing operation. Lesser quality rods are often not honed with the same attention to detail.

MATERIAL FORGED 4340:
Made from strong and durable 2 piece 4340 forgings these rods will withstand almost everything you can throw at them.

 

IE/ARP ROD BOLTS:
All IE rods come standard with ARP 2000 rod bolts. The rod bolts included in every set of IE rods are stamped with the letters "IE" as a way to ensure you have a genuine set of IE rods.

Additional Product features:
-2 Piece Forgings from Vacuum Drawn 4340 Chrome Moly Steel
-Multi Stage Heat Treat for maximum strength, dimensional stability, and fatigue life
-Fully Machined and Shot Peened
-Magnaflux Inspected
-Dimensionally Inspected
-Packed in balanced sets +/- 1 gram
-Combination tested to over 700HP+

rifle drilling

BASIC DIMENSIONS FOR IERHVA2 RODS, WEIGHTS MAY VARY SLIGHTLY PER SET

CENTER TO CENTER WRIST PIN DIAMETER BIG END JOURNAL WIDTH WRIST PIN STYLE BIG END JOURNAL DIAMETER

AVERAGE ROD WEIGHT (WITH BOLTS)

ROD BOLT DIMENSIONS

144mm

19mm

24.90mm Tapered 50.60mm 546 grams

3/8" x 1.5" UHL

1.8T CONNECTING ROD APPLICATIONS

ENGINE CODE PISTONS WRIST PIN SIZE ROD PART NUMBER

 

AEB, AGU, AMK, AMU, APX, APY,

ATC, AWD, AYP, BAM, BEA

 

OEM PISTONS

 

20MM

 

IERHVA1

 

AEB, AGU, AMK, AMU, APX, APY,

ATC, AWD, AYP, BAM, BEA

 

AFTERMARKET PISTONS

 

20MM

 

IERHVA1


AMB, ARX, ARY, ATW, AUM,

AWM, AWP, AWW, BJX


OEM PISTONS


19MM


IERHVA2

 

AMB, ARX, ARY, ATW, AUM,

AWM, AWP, AWW, BJX

 

AFTERMARKET PISTONS

 

20MM

 

IERHVA1

 

AEB, AGU, AMK, AMU, APX,APY,

ATC, AWD, AYP, BAM, BEA

 

OEM & AFTERMARKET PISTONS

 

20MM

 

(TUSCAN) IERTVA1

 

AMB, ARX, ARY, ATW, AUM,

AWM, AWP, AWW, BJX

 

AFTERMARKET PISTONS

 

20MM

 

(TUSCAN) IERTVA1

* Please verify your engine code before ordering, only engine codes displayed in red are for this rod application.

 

Features

 

  • 2 Piece Forgings from Vacuum Drawn 4340 Chrome Moly Steel
  • Multi Stage Heat Treat for maximum strength, dimensional stability, and fatigue life.
  • Fully Machined and Shot Peened
  • H beam Design
  • Tolerances as tight as .0003 ground on Sunnen brand equipment
  • Standard ARP2000 Rod Bolts
  • Computer Optimized Design
  • Magnaflux Inspected
  • Dimensionally Inspected
  • Packed in balanced sets +/- 1 gram.
  • All this at a price point that yields market leading value

Dimensions
  • 144mm Center to Center
  • 19mm Tapered Wrist pin
  • 3/8 ARP 2000 Rod Bolts

Applications

 

These particular Rods fit the following engines, however they may fit more with custom pistons or other pieces. Please check with us first if there is any doubt.

  • Most VW/Audi 1.8t Engines w/ 19mm Wrist Pin Pistons(if using stock pistons, you need these rods)
  • Drop In with Factory Pistons for: AWP, AWW, ARY, AWM, AWT, AVJ Engine Codes
  • Combination tested to over 500whp!!
  • Possible to install without removing engine


FAQ:

Are these are direct replacement for my factory rods?
These rods are designed to fit stock 1.8T pistons that use that use a 144x19mm rod. Most 1.8T engines use this rod, however, some older 1.8T versions may use a 144x20mm rod with stock pistons. If you are using aftermarket pistons such as JE, Wiseco, Mahle, and so on, you most likely need a 144x20 rod (IE part number IERHVA1 or IERTVA1).

Is there a proper orientation to install the bearing tangs on our connecting rods?
We recommend installing the bearings tangs facing the exhaust side of the engine.

Are these connecting rods forged?
Yes, all Integrated Engineering Connecting Rods are made from tough and durable 4340 forgings. These forgings far exceed the quality of most factory rods that are typically made from powdered metal as a cost saving measure.

What other parts will be needed to install my new IE connecting rod set?
At a minimum you should use a new set of connecting rod bearings when installing rods. We also offer several install kits to make this process as easy as possible. For more information on rod bearings and install kits, please see the install kits section above.

Do these rods require any additional machine work for installation?
IE connecting rods are delivered to you in "ready to install" condition. Other engine machine work may be required though when rebuilding an engine, such as decking the block or boring and honing cylinder walls.

Is balancing the engine required when installing these connecting rods?
Since IE rods are sold in balanced sets this is not required. In extreme performance applications this can still be done if desired.

How much do these rods weigh?
The average weight of a single rod with bolts is 546 grams. Rod weights can vary slightly per set. More technical information can be found in the basic dimensions section above as well.

 

 

About Integrated Engineering: Merging decades of experience with hundreds of hours of prototyping, engineering, dyno testing and daily usage evaluation has output exhaust systems that are the ultimate compliment to your performance car. IE products are proudly engineered, designed, and manufactured in-house, in Salt Lake City USA.

Recently Viewed Products

Can't find what you're looking for?
Odds are we can get it! Click Here Now