Flashing the E85 fuel map allows easy fill-ups at the pump without mixing ethanol blends. This ethanol calibration delivers a massive increase in power over regular 91/93 pump gas while keeping mid-range power in check with the factory direct injection (DI) system and avoiding lean conditions, misfires, and power loss. E85 offers amazingly fast and consistent power delivery from the pump and is much less expensive than race gas.

Ready to experience an absolute torque monster!? Mixing regular 91/93 pump gas and E85 at a 40% ethanol content (E40) creates a blend that stays within the safe limit of fuel delivery for the factory injectors. This allows the E40 calibration to produce the full torque output available from the twin-turbo V8, resulting in an insane 862ft-lbs of torque that translates to a pull with seat slamming g-forces.

An ethanol content sensor kit is highly recommended when running ethanol blends.

In areas that do not have readily available ethanol or track enthusiasts with accessable race fuel pumps, the included 104-octane race gas file also succeeds in a considerable jump in power over regular pump gas. Sunoco GT260 Plus 104 octane is used to develop this tune and is highly recommended for the best results.

The included stage 1 transmission tune raises the factory torque limits to allow for large gains in power and torque from the ECU tune. This TCU tune also features user-adjustable launch control for chest-pounding launches from a stop and further increases acceleration. Three different launch RPMs (street, aggressive, or race) are included to dial in the fastest launch for your vehicle and tire setup.

Commonly used in roll racing, Brake Boosting allows you to build extra turbo boost by applying brake pressure while accelerating. Release the brake pressure for a "rolling launch" and leg up on the competition.

The factory ECU calibration is full of regulations and compromises that limits horsepower/torque and dull the power delivery and throttle feedback. IE calibrators re-tuned the complicated mass flow modeled boost control mapping with advanced strategies to achieve precision boost request targeting that results in unmatched power delivery. The throttle mapping also receives a significant rewrite to deliver a linear and predictable throttle feedback. These refinements result from months and months of fine details that dramatically improves your conneciton to the car with a much sportier and precise feel.

Exhaust Gas Temperature (EGT) is the measurement of fuel mixtures exiting the exhaust and is used to determine the health of the fuel/air mixture entering the engine. IE engineers have spent countless hours adjusting boost air/fuel ratio, ignition timing angle, camshaft phasing, intake air temps, and much more to develop the proper EGT adjustments for ultimate engine safety without sacrificing power on all octanes.

SHIELD YOUR ENGINE

Even with the best tuning solutions, mechanical failures such as failed injectors, spark plugs, fuel pumps, or even a bad tank of gas can still pose a serious risk to your finely tuned Audi or VW engine.

iE AutoProtect is our proprietary and advanced combination of custom code and maps based calibration programming with constant cylinder monitoring. If a dangerous condition occurs, AutoProtect springs into action. Boost and power is lowered instantly and our own unique check engine light code is generated to help identify the problem. Once engine conditions are safe again, normal power is automatically restored.

AutoProtect acts as your engine's final defense. It even protects in situations where factory calibrations fall short.