Home > VW > Mk4 Golf/Jetta > VR6 > Suspension > Suspension Parts >

Front Strut Mount Half Caps "LOW" Kit w/Bearings | Mk4 |Audi TT

Mk4_Low_Mount Front Strut Mount "LOW" Kit w/Bearings | Mk4




Add Billet Half Caps

Add Strut Nut Tool

Product Info Vehicle Applications

Looking to go a little lower in the front of your Mk4 or AudiTT? These Low strut mounts from an early Audi model will give you an extra 5/8" of drop. These are a higher density mount that will last longer than stock ones too! They do require the change to early style strut bearings and strut nuts (included in kit).

Available Options (select above):

  • Short "Half Caps" for upper strut stop. Using factory strut stops will result in large gap between the body and the strut top with these shorter mounts. While Not required we HIGHLY recommend them. The new Half Caps require the transfer of the rubber ring from the stock strut stops. (see pictures below - the rubber rings are NOT available by themselves and NOT included with this option)

  • Strut Nut Tool for early style nuts used with these mounts

Sold as a PAIR