Advanced Anti-lag launch and rolling launch control
Instant launch-RPM setting from cruise control stalk
Stage 1 for stock hardware or basic bolt-ons
Stage 2 for aftermarket downpipe support
Stage 3 for Pure800 turbo upgrade
Available with matching transmission tunes
Take control of your Audi B9 by unlocking thrilling power and acceleration from your phone! Our cutting-edge engine and transmission tunes transform your car through the innovativePOWERlinkBluetooth dongle that plugs into your vehicle's OBD II port. Our responsive mobile app links the dongle to your Apple or Android phone, giving you the power to tune your car, change octanes, upgrade stages, perform diagnostics, monitor live gauge data, and more —all from the palm of your hand!
EFFORTLESS E85
Ethanol is rocket fuel for your daily driver. Our TrueFlex flex fuel conversion kit upgrades the factory engine computer to read and instantly adapt to any ethanol blend, unleashing huge power.
ANTI-LAG LAUNCH
Gain the boosted advantage with iE’s advanced anti-lag launch and rolling launch control standard on all stages. This custom-coded strategy build boost before takeoff, delivering an aggressive launch that shaves down acceleration times. Fine-tune your launch with instant launch-RPM switching and adjust your launch point in real time to match tires, surface, and conditions without reflashing. For roll racing, rolling anti-lag holds a set RPM and speed while building boost to unleash instant power and gain the upper hand when it counts.
ECU STAGES
STAGE 1
UP TO 542HP & 558FT-LBS TORQUE
iE Stage 1 ECU calibration is a simple flash-only upgrade that delivers instant excitement, providing a broader powerband, a higher rev limit, and increased boost pressures that result in significantly faster 0-60 times and improved acceleration. This advanced calibration can be installed on a completely stock car, and it will adapt to take full advantage of intake and intercooler upgrades.
Auto-start/stop defaults to off (can be turned back on)
Includes advanced TrueFlex ethanol (requires hardware)
Shielded by iEAutoProtect
STAGE 2
FOR THE EXHAUST LOVER
The 2.9T engine includes two larger and efficient factory downpipes that do not result in power or exhaust restrictions on stock turbocharger. Although this platform does not provide additional power gains on Stage 2 tunes, this is ideal for users seeking a more aggressive exhaust note and includes an enhanced exhaust overrun/crackle feature in dynamic drive mode.
More aggressive overrun/crackle in Dynamic mode
Crackles enabled for free revving in park or neutral
Includes advanced TrueFlex ethanol (requires hardware)
Includes Stage 2+ for use with iE HPFP upgrade
STAGE 3
UP TO 741 HP & 688 FT-LBS TORQUE
Experience the supercar-crushing performance of iE Stage 3 engine and transmission tunng designed for the bolt-in PURE800 twin turbo upgrades. Your RS5 will be completely transformed into a torque-rich powerhouse with explosive throttle response, minimal lag, and relentless pull through redline. Experience massive horsepower gains while preserving the everyday comfort and refinement.
UPGRADING STAGES
Upgrading from Stage 1 to Stage 2 or beyond is simple with iE! You only need to pay the price difference between the tunes with no additional fees. Once you've installed the necessary matching hardware, just follow the instructions on your POWERlink app to purchase the tune upgrade, and you'll be outperforming the competition in minutes!
ADDITIONAL TUNE FEATURES
ETHANOL FUEL
Ethanol fuels are included and unlock the most performance potential from our ECU tunes. Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides more horsepower and torque than running conventional gasoline and is much less expensive than race gas.
STAGE 1 & 2 PLUS
Stage 1 & 2 Plus tunes require an upgraded High-Pressure Fuel Pump (HPFP) to unleash the maximum power potential from E85 fuel. This enhanced HPFP can deliver a higher fuel demand, resulting in a remarkable 604 horsepower and 660 ft-lbs of torque! Requires iE HPFP upgrade.
BRAKE BOOST
Commonly used in roll racing, Brake Boosting allows you to build extra boost by applying brake pressure while accelerating. Release the brake pressure for a "rolling launch" or extra surge of power.
EXHAUST OVERRUN
Stage 2 files turn up the volume on exhaust overrun crackles for an exciting exhaust sound on engine decel and when free-revving in neutral or park. This feature is enabled in Dynamic drive mode.
AUTOPROTECT
Even with the best tuning, unreliable fuel and mechanical failures still pose a risk to any engine. iE AutoProtect is your last line of defense against engine damage. If trouble pops up, AutoProtect lowers boost and power to keep your engine safe against damage. When conditions return to normal, power automatically restores. Our unique error code is triggered so we can help pinpoint the problem. LEARN MORE
HARDWARE GUIDE
While no hardware upgrades are required for Stage 1, upgrading the intake, turbo inlet, and intercooler will provide increased airflow, lower intake air temps, and quicker heat soak recovery for an overall more efficient and faster vehicle.
PART UPGRADE
STAGE 1
STAGE 2
NOTES
STAGE 1 TCU TUNE (INCLUDED)
Required (included with purchase)
STAGE 2 TCU TUNE
Compatible with all stages
AIR INTAKE
Compatible with all stages
TURBO INLET PIPE
Compatible with all stages
INTERCOOLER
Compatible with all stages
HEAT EXACHANGER
Compatible with all stages
HPFP UPGRADE
Requires Stage 1 or 2 Plus
CATBACK EXHAUST
Compatible with all stages
DOWNPIPES
X
Not Compatible With Stage 1
MAXIMIZED OUTPUT
iE's advanced tuning technology suite allows our software engineers to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with the power to keep you smiling every mile.
POWER GAINS
North American Region (NAR) = AKI / Rest Of World (ROW) = RON
STAGE / FUEL
HORSEPOWER
TORQUE
StockAudi advertised numbers
444 HP
443 FT-LBS
StockIE dyno numbers
456 HP
485 FT-LBS
Stage 1 & 2 91 AKI / 95 RON
502 HP
565 FT-LBS
Stage 1 & 2 93 AKI / 98 RON
522 HP
572 FT-LBS
Stage 1 & 2 E85 / TrueFlex
542 HP
581 FT-LBS
Stage 1 & 2 Plus E85 / TrueFlex
604 HP
660 FT-LBS
Stage 3 PURE800 91 AKI / 95 RON
583 HP
600 FT-LBS
Stage 3 PURE800 93 AKI / 98 RON
611 HP
630 FT-LBS
Stage 3 PURE800 TrueFlex
741 HP
688 FT-LBS
POWERlink Mobile
Add power to your Audi or VW and experience the game-changing freedom of mobile flashing. The IE POWERlink cable and app connect to your Apple or Android phone, giving you the power to tune your car, change octanes, upgrade stages, perform diagnostics, monitor live gauge data, and more. All from the palm of your hand! Add power anytime, anywhere -no laptop, no cord, no hassle.
Existing IE POWERlink V4 cable owners will require a free firmware update to enable Bluetooth connectivity. Simply plug in your cable to your Windows 10+ device and launch our Flash Wizard software to auto-update your cable.
Note: POWERlink Mobile requires an IE POWERlink cable, and the necessary credits required to tune your car. For further questions, contact sales@urotuning.com.
Download the app today! Available on both Apple and Android.
