EBC S14 Kits Greenstuff Pads & RK Rotors (Rear 281x12mm) | S14KR1208

The EBC Orangestuff is a full race material for intermediate to expert drivers for demanding track conditions. Designed from the ground up to meet rigorous track conditions meant hours of testing and formulation from EBC's scientist.

EBC Brakes have demanded a more aggressive full race material for "track only" use that is not required to bring a vehicle to rest (which Bluestuff NDX was specifically designed to do) and this has led to the development of the EBC Orangestuff brake pads. The EBC Orangestuff brake material will be dusty and slightly more aggressive on brake rotors which is the trade off when using a full race pad.

• Longer track wear life by 40-60% in the most extreme conditions
• Better fade resistance at disc temps where rotor is glowing red
• Great initial cold bite when compared to other track materials
• Street legal in the USA, vehicle can be driven to the track
• Factory heat scorched to reduce bed in times to minutes for fast track changes

EBC RK Series Premium OE Replacement Plain Brake Rotors by EBC®. Sold In Pairs. This replacement brake rotor is sized and shaped to OE factory dimensions with the strictest quality controls and machined to be within extremely tight tolerances of less than 0.05 millimeters. High quality "gray" iron meets or exceeds factory original specifications regarding thermal buildup, brake noise, vibration, and wear. The anodized layer is designed to disappear in the area that the brake pads contact the rotor.

Features:

• Sized and shaped to original equipment specifications with extremely tight tolerances
• Designed to meet or reduce factory levels of heat buildup, brake noise, vibration, and wear
• Recommended by EBC for use with EBC Ultimax and Yellowstuff pads
• Black GEOMET™ and NITROTHERM™ anti-corrosive finish
• Recommended by EBC for normal street driving, high-performance street driving, truck or SUV use, drifting, and short track runs
• High quality "gray" iron features a higher carbon content to reduce brake shudder, heat cracking, and high-frequency vibrations which cause squealing
• EBC recommends a 500-mile break-in period with lighter braking application

Benefits:

• Perfect for non-aggressive driving
• Ensure quiet operation
• Offers low dust and long pad life
• More resistant to warping or cracking

Why pay dealership prices that are marked up 100% when you can purchase EBC high-quality Premium OE Replacement Rotors for less? Unlike cheaper, inferior replacement rotor that may look identical to original equipment, EBC builds these to match original factory dimensions and machines them to extremely tight tolerances. But they did not stop there. EBC has applied their engineering expertise to create an iron compound that exceeds the quality of most original material blends, so these rotor actually improve on factory levels of heat buildup, brake noise, vibration, and wear. A higher percentage of carbon and silicone is present which leads to the formation of graphite during the curing process. When graphite is present, the rotor itself takes on qualities of a denser, softer material. Heat is more evenly dispersed to reduce warping, cracks are less likely, and vibration-related noise is greatly reduced. Premium OE Replacement Rotors is anodized for corrosion resistance, and rotor should be fully ready for performance driving after a 500-mile break-in period.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov