MTS Technik Street Series Coilovers 1988 - 1997 BMW 5 Series | MTSGWBM14

MTS Technik Street Series Features:
- 2 year warranty with no mileage limit to confirm high quality.
- Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
- The use of twin-tube technology guarantees stable shock absorber performance.
- Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
- Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
- The camber plates allow the wheel angle adjustment and increase the precision of driving.
- Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
- Additional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
- Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
- Coilover springs made by Eibach, the world leader in the sport springs industry.
Product Notes
- Front and rear axle height adjustable (threaded shock absorber housing).
- Not for 4x4.
- Only for vehicles without NIVO / factory pneumatic suspension.
- If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
- During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
- Independent height adjustment at the lower brackets on the front dampers.
- Set includes 2x upper "camber plates" on the front axle.
- The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
- Including M-Technik.
Product Specifications
| Part Number | 60708002 |
| Vehicle | MTS Technik Street Series Coilovers 1988 - 1997 BMW 5 Series |
| Engine | 518i / 520i / 525i / 530i / 540i / 525td / 525tds / M5 |
| Chassis Code | E34 |
| Lowering Front Axle | 20 - 95 mm |
| Lowering Rear Axle | 20 - 85 mm |
| Max. Axle Load(Front) | 1060 kg |
| Max. Axle Load(Rear) | 1300 kg |
| Additional information | strut diameter at the front axle of 55 mm |
⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Our expert team is here to assist. Contact Us Now!




