ST Suspension AZX Wheel Studs (M14x1.5x15mm/ Round 5mm Allen) | STS-56110387
- Share:
![email]()
![Facebook]()
![Twitter]()
![Pinterest]()
)
Select Your Car to Verify Fitment
The ST threaded bolts are used to mount the AZX system. The ST threaded bolts (screw-in bolt with double thread) enable an easy conversion from wheel bolts to wheel studs. In the AZX-spacers are common threaded sleeves that are used for bolt-on systems for vehicles with wheel nuts. While installation the ST threaded bolts are screwed into these threaded sleeves. Now the AZX wheel spacers can be used for vehicles with wheel studs. The ST threaded bolts are available in different thread types so that the original wheel nuts can be used.
Important note! Minimum thread engagement must be considered:
- M12x1,25 at least 8,0 turns
- M12x1,5 at least 6,5 turns
- M12x1,75 at least 6,5 turns
- M14x1,25 at least 9,0 turns
- M14x1,5 at least 7,5 turns
- 1/2" at least 8,0 turns
Caution:
- Wheel bolts that are too long may cause damage at the axle components.
⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Can't find what you're looking for? Need help?
Our expert team is here to assist. Contact Us Now!
Our expert team is here to assist. Contact Us Now!
