VTT VAG (VW/Audi) 5x112 to 5x114.3 15mm Conversion Wheel Spacers Set of 4 (SCRATCH AND DENT)

Looking to convert your 5×112 M14x1.50 VAG vehicle to 5×114.3 to open up your wheel options DRAMATICALLY? We got covered with our VTT wheel spacer conversion kits. These kits are machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We then press in 10.9 class studs, with corrosion-resistant zinc coating for years of use. The spacer then accepts either a 5×114 wheel. The 5×114 use M14 studs,. All the spacers have a 57.1 bore size to fit 99% of VAG applications. 

PLEASE NOTE! This does not mean they fit ALL VAG applications it means the fit 57.1 bore size applications, it is your responsibility to know your bore size before ordering!

No wobble bolts or redrilling here.

Note: Apply lock-tite to the bolts that hold the spacer to the hub and torque to OEM spec. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 Miles.

Note: These WILL REQUIRE a thin wall 7/8″ pr 22mm socket to install the bolts to the hub as clearance it limited between the bolt head and the spacer.

Vehicle Hub Thread Spec
WE MUST have your hub thread spec to get you the proper bolts for the spacers. Its either M12x1.5, M14x1.5, or M14x1.25. Most older BMW up to F series are M12x1.5, most newer BMW F/G series are M14x1.25. Most VAG (Audi/VW) are M14x1.5. Please make sure you know what you have and let us know when ordering.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

• Shipping & Returns