0 comments / Posted by Nathan Fugleberg

Labor Day Savings from NEUSPEED!

Take advantage of Labor Day savings on a power module upgrade from NEUSPEED before time runs out!

The NEUSPEED Power Module is a device that allows you to easily upgrade the performance of your vehicle without reducing the reliability or integrity of your vehicle's engine, clutch or driveline.

The simplest and best alternative or option to chip tuning, NEUSPEED Power Modules use a proprietary vehicle specific 128 bit processor and are a plug and play box that intercepts at the Boost Sensor, Wastegate Control Valve and RPM signal. NEUSPEED Modules can be installed or removed without any detection.

With convenient settings for +5 psi, +8 psi, and stock boost, The power module allows you to improve performance easily and reliably. The electrical components are housed in a billet aluminum enclosure which is protected from the elements and is designed and manufactured to be positioned within the engine bay of your vehicle.

Sale ends 9/3!

Power Modules on Sale Include:

Neuspeed Power Module | 1.8T TSi Gen2.5 | 3.0

Two position switch:

  • 91+ Premium Fuel / 4 PSI Increase
  • 100+ Octane Fuel / 6 PSI Increase

Power / Torque Gain:

  • 1.8 TSI: 35+ HP / 35 ft./lbs.Torque
  • 2.0 TSI: 40+ HP / 40 ft/lbs.Torque
 

Neuspeed Power Module | Mk7 GTi | Audi A3 (8V) 1.8T | 2.0T | Gen3

Increases boost by modifying the charge pressure and map sensor readings

  • Allows ECU to remain in control of boost
  • The actual boost is increased by a precise amount
  • Boost is increased in a gradual, progressive fashion
  • Uses the closed loop control of the ECU to increase boost
 

NM Engineering Power Module - F55 | F56 S & JCW (2.0L)

  • Allows ECU to remain in control of boost
  • The actual boost is increased by a precise amount
  • Boost is increased in a gradual, progressive fashion
  • Correct Air/Fuel mixture maintained from the wide band O2
  • Ignition timing optimized by the ECU
  • Retain factory engine safety protocols
  • Not effected by ECU reprogramming by the dealer
  • Plug-and-Play intercept at T-MAP sensor connector location

NM Engineering Power Module - R55/56/57/58/59/60/61 S/JCW/GP2

  • Allows ECU to remain in control of boost
  • The actual boost is increased by a precise amount
  • Boost is increased in a gradual, progressive fashion
  • Correct Air/Fuel mixture maintained from the wide band O2 and closed loop mode of the ECU
  • Ignition timing optimized by the ECU
  • Retain factory engine safety protocols
  • Not effected by ECU reprogramming by the dealer
  • Plug-and-play

Comments

Leave a comment

All blog comments are checked prior to publishing